Type in the full discussion title or a part of it.
Discussion Title Created date
How To Make ports Input ,Output
Hello. well iam trying ti get to know how to turn onn and off few ports on some ports.I will be using a 2323 or Atmega8.well lets do the 2313.and using AVR4,so i would like to...
Friday, 13 February 2004 - 19:52
Help me write a timer code in Bascom
I would like portb.3 at the bottom of the program to go off after 16 hours from the time it goes high. sincerely. Config Portb = Output Config Pind.5 = Input Config Pind.4 = Input...
Wednesday, 28 January 2004 - 02:54
Timer in Bascom
how can i write a code for Bascom avr to make a timer,for example. PORTb.5=1 code here.' ' ' at the end of the timer PORTb.5=0 I would like it to count for 16 hours on port b.5...
Monday, 26 January 2004 - 00:17
stepper motor
I took out a stepper motor from an ibm floppy 51/4 ,the motor to read the head, it took me a while to figure out the wiring,because its just a flat cable,then i hooked it up to a...
Sunday, 25 January 2004 - 07:43
Help write a program in basic
iam trying to write a simple program in bascom avr and i cant get the thing , well i like to use the if ,then else. ofcourse i dont know much about programing, can you help,...
Sunday, 25 January 2004 - 06:34
attiny def.
Hi. where can i get the attiny15 def so, i can compile a program in wavrasm .using ofcourse asm language. sincerely matthew
Saturday, 24 January 2004 - 07:30
Nicad Charger appl note 450
Well, i realy would love to build this charger , i have few but not using a MCU.but just for the challenge i need to. so i have many questions. at ATMel site they have under the...
Tuesday, 20 January 2004 - 08:28
can I sustitute Max232
Does anyone knows if i can use transistors or diodes as a substitute for the max 232 .iam using the serial port to the max and then to an At2313.or could i use a 74hc4066. or...
Monday, 19 January 2004 - 03:48
How To QBasic
Hello. I would love someone to guide me to files or some projects written in Qbasic, I prefer them not to be complex, so i can understand them. However, any are welcome,and if you...
Monday, 12 January 2004 - 15:27
Build a Nicad charger
i would like to build a Nicad Charger for a 9.6 volt battery at 2400 maH.I would like it to be automatic and all, the time to discharge and to charge, and when to stop , i built...
Monday, 5 January 2004 - 03:22
How can I tell,C,Qbasic,Assy
Sometimes i look up some projects on the internet , done by some guys, how to build something, they have the schematic and the code, which is great. however, i dont know ist...
Saturday, 27 December 2003 - 01:05
2.4GHz DSSS comms
Has anyone a Wireless LAN card ( DSSS @ 2.4GHz) for a communications? The data rate is normally 11MBit/s but can be set real low in the kbit/s region. The card are super cheap...
Monday, 3 November 2003 - 05:56

Pages