Post Created date
Only problem with PDI is if you set the SUT to 64ms - then it can be a problem (sometimes).
Tuesday, 28 June 2011 - 03:20
Failing to enable NVM interfaces through PDI
If you have the SUT (start up time) fuse bit set to 64ms, this can cause problem with reading and programming Xmegas through some current PDI implementations.
Tuesday, 28 June 2011 - 03:15
Programmer flashing failure with CVAVR and xmega
But...I'm running XP as an administrator?
Friday, 5 November 2010 - 02:00
Programmer flashing failure with CVAVR and xmega
We are running multiple computers with CVAVR - one of our computers is unable to program through CVAVR, yet is perfectly happy to do so using AVR studio. Our other computers have...
Tuesday, 26 October 2010 - 20:34
Xmega PDI issues - read but no write
Had the same problem with an xmega32d4. Erratic chip signature reading, and inconsistent erasure. Sometimes had to errase 5-10 times before new programming. Replaced chip, problem...
Thursday, 14 October 2010 - 02:04
AVR Errata - Unpublished, and other "Gotchas"
Device: ATxmega32d4 32d4 GPIO Registers Dear Customer, ATxmega32D4 has only 4 GPIO registers. We will try to fix the document at the earliest possible. Best Regards, Anupama...
Tuesday, 12 October 2010 - 22:42