Post Created date
Do i need whole Atmel Studio to upload hex files into Xmega?
thx everyone. I will try it with my programmer.
Thursday, 24 October 2019 - 09:05
Do i need whole Atmel Studio to upload hex files into Xmega?
How do i do that? I cant find just exe program. Only some with C files.
Wednesday, 23 October 2019 - 21:16
2 xmega128a1u doesnt get recognized anymore by programmer.
It started working somehow. I just resolder wires for 10th time...
Monday, 16 September 2019 - 22:52
ATXMEGA32A4U ADC periodic noise
Im measuring battery liion voltage in some devices with xmega12a1u and also got "waving" results. No cap or any other settings of measuring solving this. They are crapy adc and...
Monday, 16 September 2019 - 20:59
XMEGA SPI question
If it's actual, try change SPIC for SPID, I have problems with C. Only D seems to work. On xmega32a4.  
Thursday, 30 October 2014 - 17:14
AT90USB162 on 3.3v
Look people, AT90USB162 have internal regulator 3,3V! Do you even datasheet? You give 3,7-5V to UVCC, 1u cap at UCAP to GND, and voltage from UCAP to AVCC and VCC. Thats all. No...
Tuesday, 28 October 2014 - 18:32
ATmega32U2 and AT90USB162.
K. Working with Atmega128, i test xmega later. Thx for tips and helping. But there is some problem , on my comp. it's invisible for AVRstudio4, but on the other one laptop it's...
Saturday, 30 October 2010 - 12:04
ATmega32U2 and AT90USB162.
Ok i made that, i programmed m32u2 by Atmel Flip, its got firmware nr. 100807, and it's visible for WinXP in sys. as "LibUSB win32 devices > Avrisp mkii", it got some drivers from...
Tuesday, 26 October 2010 - 20:41
Xmega128A1 EBI
Well, I decided to use cmos sram KM616V1002, its 20ns SRAM, bud it 16bit wide word. Of course I can use only 8bit, wright? 20ns means 50Mhz?
Thursday, 30 September 2010 - 21:05
ATmega32U2 and AT90USB162.
So maybe i try zeners, for decrease signals from M32u2 to 3.3V ? It will decrease from programmer, and will not decreease level from target to M32u2? M32u2 will now the high level...
Sunday, 26 September 2010 - 18:01
ATmega32U2 and AT90USB162.
In xmega I don't need any usart or spi - i don't now what you talking about. All i wanna now, is the xmega can be programmed by M32u2/at90usb directly , with no any zeners,...
Sunday, 26 September 2010 - 16:00
Xmega128A1 EBI
So if I want SDRAM, it can be only in 4bit mode..? that sux. What is faster for using for xmega, SRAM at 12mhz (they are all 70ns) or 4bit mode SDRAM at ANY speed??
Sunday, 26 September 2010 - 14:11

Pages