Post Created date
ATMelICE signed dummy kext for MacOS X High Sierra
@ wespiard : Still no luck here.
Friday, 22 December 2017 - 09:10
ATMelICE signed dummy kext for MacOS X High Sierra
The first time I loaded it, it did give me the warning and and I clicked approve in the System Preferences. But after a restart the extension was still not working. So decided to...
Wednesday, 13 December 2017 - 11:42
ATMelICE signed dummy kext for MacOS X High Sierra
I have an AtmelICE device. I have placed the kext file in the extensions folder. And I have entered the following in terminal:   sudo chown -R root:wheel /Library/...
Monday, 11 December 2017 - 17:44
Atmel Studio 7.0.1006 installation hangs
I had the same Hanging issue on Windows 10 with both the Web Installer and the Offline Installer.  Dirac's solution worked. Thanks Dirac! ~R  
Wednesday, 29 June 2016 - 15:37
AVRDUDE 6.1 released
Hi all, Avrdude + Atmel ICE + MacOS X was working great after applying the fix described by beschulz (comment #32 of this thread). That is, until I updated to El Capitan...
Sunday, 4 October 2015 - 13:11
AVRDUDE 6.1 released
beschulz, Fantastic! That works! I have been going insane trying to get the Atmel-ICE to work and your solution did it. Thanks!   A couple of notes for anyone else trying...
Wednesday, 14 January 2015 - 19:58
Broadcasting one UART to many
@ CirMicro the distance involved is only about a meter and a half.
Saturday, 25 October 2008 - 13:01
Broadcasting one UART to many
Thanks for the fast responses guys! For safety of testing we were going with a low baud of 9600, and were hoping to speed it up later.
Monday, 13 October 2008 - 21:20
Broadcasting one UART to many
Yep, ground is good. The TTL is 3.3 (and also 5v tolerant, i think).
Monday, 13 October 2008 - 20:09
An interesting AVRISP2 modification
The STK500 can source quite a bit of power when used as an ISP.
Saturday, 2 June 2007 - 13:21
[HARD] Atmel Tools Overview
I see the STK500 status is listed as 'End of Line'. Does anyone know when the replacement board will arrive and what features it will include?
Wednesday, 30 May 2007 - 15:45
How to know if my device is supported (?)
To test I tried compiling for a few other targets. I tried compiling for the three devices you mentioned and each give the exact same results as the Tiny13: 'unknown MCU'. (...
Thursday, 21 December 2006 - 17:16

Pages