Type in the full discussion title or a part of it.
Discussion Title Created date
Using avr-gcc as "dumb" assembler and having access to io.h
I'm making a project for the ATTiny10 (or smaller). For this project I thought I'd like to use gcc as essentially a "dumb" assembler, but I'm having trouble including the I/O...
Thursday, 23 January 2020 - 04:20
Is it valid to set a "write only" lock bit configuration?
The datasheet says this:     Missing from the chart, is the combination LB2=0, LB1=1. Logically this combination should mean that reading the flash contents cannot be...
Saturday, 7 February 2015 - 03:15
NC pins on Mega8515 vs supply pins on Mega162
I'm making a board which I want to be compatible with both ATMega8515 and ATMega162. Those chips are mostly compatible in terms of IO pinout, but there's one difference. The 8515...
Tuesday, 22 October 2013 - 00:47
Are banked registers saved between mode switches?
The ARM7 in the SAM7 series has a number of modes with banked CPU registers. Are the banked registers stored between mode switches? For example, when FIQ mode is entered, will R8-...
Monday, 9 August 2010 - 12:30