Type in the full discussion title or a part of it.
Discussion Title Created date
Timer/Counter Issue
I have some working timer/counter code which stops working when I add the bootloader section. The bootloader section runs first, shifts the interrupt vectors accordingly, then...
Wednesday, 17 December 2014 - 05:17
Native USB
Was just wondering if the XMEGA can host its own USB driver and install it upon plugging it into a pc. Is this at all doable? I don't want to do virtual com port stuff as I'm...
Saturday, 22 March 2014 - 01:52
Atmel Studio 6.1 Builds Incorrectly
6.1 builds my code wrong. Is there anything I have to set up to get it the same as 6? I have both 6 and 6.1 installed and it is clear when comparing the hex files compiled from...
Monday, 2 September 2013 - 04:28
Dead AVR Issue
I've got an issue with my 324p board where I can program it and read the correct fuses but it fails to run due to a problem with the reset line. After maybe half a day of...
Wednesday, 17 July 2013 - 05:24
Code snippets won't change
I have edited a few existing avrgcc snippets for avr studio 6 but they don't change when I go to use them. Is there some sort of cache that I should clear to get it to recognise...
Monday, 8 October 2012 - 06:54
Ethernet Loopback
I am trying to develop a fast way to test a serial-to-ethernet module without relying on a network connection. To do this I want to just plug in a short ethernet cable where I've...
Thursday, 4 October 2012 - 00:36
Bootloader question
I just have a bit of a question in regards to the example code in the AVR1605 Bootloader Quickstart Guide and AVR1316 Self Programming Guide. The 1316 in particular has no...
Thursday, 13 September 2012 - 02:04
SPI Hardware Issue
Our last 2 production runs we've had an issue with about 10% of our MAX11102 ADC chips where the SPI data out blocks the 324p processor from being programmed (using avrisp mkii)....
Wednesday, 5 September 2012 - 00:52
Rapid Prototype
I'm looking for somewhere that will offer rapid prototype services that will get the boards to me (in Australia) in 1 week or less. Only has to be basic specs in regards to the...
Tuesday, 4 September 2012 - 02:14
Are XMega chips good yet?
Was thinking of using a ATXMEGA64A3 in a new design but I just remember last time I looked at them a few years ago they were plagued with issues. The errata in the datasheet looks...
Wednesday, 22 August 2012 - 01:54
Blackout logging
Just wondering if there is a reasonably simple way of detecting a blackout and quickly making note of the occurrence in memory before the power caps lose charge and the system...
Thursday, 29 March 2012 - 06:07
Printf Issue
I've got an issue where printf is failing terribly. What i'm doing is receiving 8 packets of 40 data bytes, which get's mashed into 20 words (so the packet is HB,LB,HB,LB, etc)....
Wednesday, 22 February 2012 - 04:23

Pages