Post Created date
Converting Intel hex to bin file
see if this helps http://sourceforge.net/projects/...
Thursday, 28 January 2016 - 12:53
How to get AS7 to recognize .cc files?
Most likely all the following would have to be added to adhere to gcc spec :)   file.cc file.cp file.cxx file.cpp file.CPP file.c++ file.C .C .C
Wednesday, 27 January 2016 - 11:31
How to get AS7 to recognize .cc files?
I guess, probably this configuration has to be done internally in Studio    Note: This file extension refers to c++ source file  
Wednesday, 27 January 2016 - 11:29
Atmel Studio 7 slow scrolling in large applications
I have raised a issue with the internal server, AVRSV-7263
Thursday, 21 January 2016 - 09:14
Atmel Studio 7 slow scrolling in large applications
This application that I have the issue with has the full BitCloud stack included (every file), not opened though. When I only included 1/2 the files, I found that it was much...
Wednesday, 20 January 2016 - 08:59
Atmel Studio 7 slow scrolling in large applications
@AtomicZombie In principle, Assembler projects don't get affected by Visual Assist.. but still if it helps you then it's good :)   Note: The assembler project I refer is the...
Wednesday, 20 January 2016 - 05:06
Atmel Studio 7 slow scrolling in large applications
@ryanafleming Can you confirm if this behavior happens only in a file where there are huge number of lines of code? or it happens even for a file with lines of code less than 1000...
Wednesday, 20 January 2016 - 05:01
Atmel Studio 7 slow scrolling in large applications
Disable Visual Assist from the menu "VAssistX -> Enable/Disable Visual Assist" and see if the problem goes away Also, if you have any theme set other than the default, then...
Tuesday, 19 January 2016 - 09:12
Solved: Imported project from AVR Studio 4 will not compile in Atmel Studio 7
Under "Flavours:", select "WinAVR" //here the path was incorrect, as indicated above it was still pointing to the original AVR Studio 4 path. Point the path to the AS7 one...
Tuesday, 19 January 2016 - 09:06
Solved: Imported project from AVR Studio 4 will not compile in Atmel Studio 7
Here, the "Default Include Paths:" is set to "C:\Program Files (x86)\Atmel\AVR Tools\AVR Toolchain\avr\include". <-- Wrong. This is an AVR Studio 4 path.This is the include...
Monday, 18 January 2016 - 08:39
no find "Add-In Security" in menu Tools > Options > Environment in Atmel Studio
I guess, Add-In's are deprecated from Atmel Studio 7.0 May be it is not required, check with Visual Micro anyway!   FAQ of Visual Micro ( http://www.visualmicro.com/page...
Wednesday, 13 January 2016 - 11:51
So annoying!
Go to "Tools -> Import and Export Settings" and select "Reset all settings" radio button. Then click "Next" button, choose either "yes" or "no" radio button based on your...
Monday, 11 January 2016 - 12:00

Pages