Type in the full discussion title or a part of it.
Discussion Title Created date
Sending a uint16_t over Don Blake's USI TWI Slave driver
While looking at Don Blake's USI TWI Slave driver it seems that the function void usiTwiTransmitByte(uint8_t data ) sends a single byte. However, when looking through Dan Gates...
Thursday, 16 February 2012 - 15:49
Replacing the At90CAN with an AVR32
Hello, I am somewhat overwhelmed with all the options available when running the AVR32. I am currently working on a project with an AT90CAN that receives CAN messages and ADC...
Thursday, 24 February 2011 - 14:04
ADC: 8bit works fine but 10bit operation yields large values
I am currently attempting to change my code over to enable the ADC to work in 10bit mode on an Atmega32. In 8bit mode the ADC works fine, I get numbers between 0 and 255. But when...
Saturday, 16 October 2010 - 18:26
[SD Card] write error at sector 65.
Well, I am not certain if "sector 65" is the correct terminology, but for lack of better words it will have to work for this question. What I am attempting to do is to write to an...
Thursday, 14 October 2010 - 02:04
315MHz RF, atmega32, RX does not go low.
I am currently attempting to transmit data between to atmega32s via 315MHz from the following modules form sparkfun: RF Link Transmitter - 315MHz sku: WRL-08945 http://www....
Wednesday, 28 July 2010 - 03:27
USART string to double question
My goal here is to use python to send joystick data over serial to my atmega32. From there I am going to do some more complex things, but for right now I would just like to adjust...
Saturday, 24 July 2010 - 18:43