Post Created date
32UC CAN BUS
I've tried the 32UC2 examples but they don't tell you what the variables are that are needed for initialisation or give you example routines with a decent explanation, like the...
Saturday, 22 February 2014 - 12:04
Paralleling multiple serial lines
They are all on the same printed circuit board and powered by a 3.3V source. The "master" is an atmega640 in all likelihood. The slaves are mega168s. Each 168 controls a L298...
Wednesday, 16 November 2011 - 22:44
Current Sense
Chris-Mouse wrote:you might want to look at the ACS712 current senseors. they have the advantage that the input is isolated from the output, so you can put them anywhere in the...
Tuesday, 15 November 2011 - 20:58
Stream failure on serial coms
So basically, I should execute the menu from my code? Can do. I can't get the simulator to run consistently. it gets lost somewhere in the LCD routines.
Friday, 30 September 2011 - 17:48
Stream failure on serial coms
clawson wrote:printf()'s in an RXC ISR? You sure? Yes? And? How/Where else am I supposed to do it? If I manual send characters from it is going to take just as long. If I use...
Friday, 30 September 2011 - 16:51
AVR Errata - Unpublished, and other "Gotchas"
Update: Reported to Atmel, They say it should be fixed in the next datasheet revision
Saturday, 23 July 2011 - 15:27
Errors in the ATMEGA324P Datasheet?
theusch wrote:Quote: And sorry, you are right, I misinterpretted how it shifts the bits. OK, so the rant about the code fragment in the datasheet is n/a, even though it was added...
Saturday, 23 July 2011 - 12:47
Errors in the ATMEGA324P Datasheet?
clawson wrote:Quote: even though it was added to the datasheet errors thread. ZAPrime, I can delete that post if you can't. Moderator. Go for it edit: Thanks!
Saturday, 23 July 2011 - 12:22
Errors in the ATMEGA324P Datasheet?
8011O–AVR–07/10 is the datasheet I am using. So it is 192 :P And sorry, you are right, I misinterpretted how it shifts the bits. But it remains, that does not work on my end...
Friday, 22 July 2011 - 08:56
Question about innitialising USART
Thanks alot :) I'll remember that.
Friday, 22 July 2011 - 08:43
Errors in the ATMEGA324P Datasheet?
kscharf wrote:It's just a stupid typo. I bet if you look carefully though ANY of their data sheets you'll find a few typos, miss-spellings, wrong grammar, etc. Norwegian...
Thursday, 21 July 2011 - 20:37
Question about innitialising USART
clawson wrote:Quote: What does the FILE *stream part of your input do? Read this: http://www.nongnu.org/avr-libc/u... It's the mechanism by which you connect printf() (also...
Thursday, 21 July 2011 - 20:15

Pages