Type in the full discussion title or a part of it.
Discussion Title Created date
ATEML Studio 6.1 Windows 8 Debug Problem
Hi, I have the following issue. I have three Notebooks where Windows 8 (x64)runs on. After installing Atmel Studio 6.1 (2562) the JTAGICE3 and the JTAGICE MKII are working only on...
Tuesday, 21 May 2013 - 13:06
GPIO Pin dead due to wrong DDR Register?
Hi, Is it possible that an io pin dies if you set it as an Output, while an external switch forces it to direct GND? I had the DDRx Rgister as Output and the PORTx to 1 (PullUp in...
Tuesday, 6 September 2011 - 12:34
Atmel Bootloader
Hi, Isn't there any original Atmel Bootloader (i.e. over UART) for all the Megas around? There are a lot of self programmed bootloader codes, but I don't want to deal with this...
Wednesday, 27 September 2006 - 06:04
Problems entering debugwire mode w. JTAGICE MKII on ATMEGA88
Hi, I use the JTAGICE MKII on a ATMEGA88. When starting a debug session, the message "ERROR entering debugWire mode" occurs. (DWEN Fuse is set - of course!!!) After retrying a few...
Monday, 21 August 2006 - 09:32
STK500 Voltage converter
Hi, Does anybody know what kind of voltage converters the STK500 uses for interfacing with the target voltage ? It says ".1Ft" on the 6-pin SMT-devices. I kicked one by getting...
Sunday, 25 June 2006 - 19:29
Simplest way to measure current ?
Hi, I'm searching the simplest way to measure current with (of course) a shunt and any built-in AVR ADC. The current would be 0 to 2 A over a Shunt Resistor of 0,47E. I only need...
Friday, 17 June 2005 - 07:51
ATMega48/88 DWEN Fuse Problem !
Hi, I am using a STK500 and a JTAG ICE MKII with a ATMega48 or ATMega88 TQFP soldered on Target Board (AvrStudio 4.10). I have set the DWEN Fuse to enable debug Wire Interface...
Tuesday, 15 March 2005 - 14:09
ATtiny12 PB5 out with ICE200
I am trying to set the tiny12 PORTB5 as an Output pin using the ICE200 emulator. I've unset the external reset option, configured the DDRB as output - everything works fine for...
Wednesday, 16 May 2001 - 11:08