Post Created date
Timestamp problem
I don`t need any special format, the RTC is a simple 1 second adder in a 32 bit register, I need to save my time in the RTC and be able to get it back, so the format is not...
Saturday, 13 April 2013 - 17:10
32k768 xtal dont start
with new xtal without the cap it wasn't work it oscilate at 250khz (aprox) with the 6pf everything was working fine
Tuesday, 12 February 2013 - 01:38
32k768 xtal dont start
Finaly it's work, with a xtal 6pf with 2 external 6pf capacitor.
Tuesday, 12 February 2013 - 00:32
32k768 xtal dont start
No I had order another xtal DK make a error, and they send me 100uF capacitor at the place ... Still working on
Wednesday, 6 February 2013 - 12:56
32k768 xtal dont start
On TOSC pins
Saturday, 2 February 2013 - 20:10
AVR Overclocking - MPU block survey
Just for your information, I have 2 projects running since 2 years 24h/24h with a Mega324 clock at 32Mhz, you just need a external full swing TTL output oscilator. But don't do...
Wednesday, 23 January 2013 - 21:12
Touch screen TFT display
Problem found, I had a to small delay between the command and the reading of the AD Thanks to all (Bob)
Friday, 11 January 2013 - 02:47
Touch screen TFT display
Thanks Bob I will check a look to your code,
Wednesday, 9 January 2013 - 22:22
Touch screen TFT display
In the datasheet they say touch screen controller. but I think it's more just a differential 2 channel A/D. What a "controller" must do?
Wednesday, 9 January 2013 - 03:05
AVRButterfly ISP Programmer (Dean Camera)
Thanks Smiley,
Saturday, 22 September 2012 - 02:20
AVRButterfly ISP Programmer (Dean Camera)
Hi, I just try with my level shifter http://www.microsyl.com/index.ph... and it's work just fine
Saturday, 22 September 2012 - 01:57
AVRButterfly ISP Programmer (Dean Camera)
Yes we found it, With new MCU you need more voltage to make it work, the butterfly give only 2.6v. If I put 3V on the target MCU it's work and if I put 5V on the target MCU it'...
Friday, 21 September 2012 - 23:43

Pages