Type in the full discussion title or a part of it.
Discussion Title Created date
Timestamp problem
Hi, I know that a bit of long code, but could you told me if the way I work to calculate the TimeStamp is good?. The OneWire code work Thanks Sylvain Bissonnette void...
Friday, 12 April 2013 - 21:52
32k768 xtal dont start
Hi, I use a M2561 and my 32k768 don't start after initializing the timer 2. The MCU is power at 3.3V My xtal is spec say 12.5pF, and I had try with 6pf, 12pf,18pf and the...
Saturday, 2 February 2013 - 19:19
Touch screen TFT display
Hi, I had buy a LCD TFT 800x480 pixels, I had written the code and it's work fine, but on this display there is a touch screen with a XPT2046, the value I read from is almost...
Wednesday, 9 January 2013 - 02:57
AVRButterfly ISP Programmer (Dean Camera)
Hi, Since a couple of week I use the famous buttload AVR ISP without any problem over a Mega8, and Mega32, but with a Mega324 or a Mega644 it's don't work. I try those same...
Friday, 21 September 2012 - 00:06
I2C A/D ADS1013/4/5
Hi, Is there someone who had work with Texas Instruments I2C A/D ADS1013/4/5 It's make 2 weeks I work on this animal and I can figure what I'm doing wrong. I will be please...
Friday, 7 September 2012 - 14:13
Not shure of what I do with ADC XMega128
Hi, My code work but I don't know if it's the good way to do. I what to scan ADCA from PA0 to PA3 and I want to work with interrupt, I had try with Free Run Mode but without...
Wednesday, 25 January 2012 - 16:46
beginer question
Hi, I'm complitly new to the X series, and there is manything I don't understant like. How / Where I define the AD Input0 will be on a pin?. Here is my code int main(void...
Wednesday, 14 December 2011 - 16:23
Xmega -> Dragon
Hi, I'm completly new to the X world. I just buy the Dragon and the Xplained board, I connect the jtag connector from one board to the other and the communication don't look...
Tuesday, 29 November 2011 - 18:53
Fast Line drawing
Hi, I'm looking for a algorithm to draw line in a array of 256x256, it must be a very fast algorithm and I must draw one point on 5 points to speed up this function, I will be...
Tuesday, 25 January 2011 - 16:56
New AVR project on MicroSyl.com
Just to let you know that I just finish and publish my last project on www.microsyl.com The project is a audio spectrum analyzer with 8 old vintage "magic eyes tube" as display....
Monday, 15 November 2010 - 22:37
FFT for ICCAVR
Hi, I'm looking for a fix point FFT library for ICCAVR, I had found some, but only for WinAVR, and I don't have the skill to translate all the ASM Code. The FFT code must be...
Wednesday, 29 September 2010 - 02:23
FFT question
Hi, For the first time I use a GNU FFT library, It's work I display the spectrum of my frequancy. My question is how can I know what is the frequancy store in the spectrum...
Thursday, 23 September 2010 - 21:24

Pages