Type in the full discussion title or a part of it.
Discussion Title Created date
Which tiny?
When designing new controller boards, we tend to use the same old MCU's, usually a M48 family or the T25 family. Sometimes though, we need just a few more IO pins then what the...
Wednesday, 2 April 2014 - 15:04
Trying to find reason for reset on T25
I'm working on a project with a Tiny25 and having some trouble trying to determine if the most recent reset was from the BOD or POR. Testing the MCUSR register bits and turning...
Wednesday, 26 February 2014 - 21:10
Programming EEProm with uniq serial number
Hi Freaks, I looking for an easy method to assign a serial number to each mega48 we program and store it in eeprom so it can spit it out when needed. We currently use dos stk500...
Wednesday, 20 November 2013 - 21:15
overclocking, well sorta!
I need some sage advise from the freaks! We make a sensor based on the M48PA that runs on 5v VCC and that uses a 16MHz xtal. A new client has asked us to produce a 3.3v version...
Monday, 19 August 2013 - 18:05
Programming a serial number
Hi fellow freaks, Looking to see if anyone has done this, before jumping into the project. We need to record a board serial number either into the flash or eeprom so it can be...
Monday, 8 July 2013 - 17:38
Dragon Case
I found this on the web and since I did not see it mentioned in a thread anywhere, I thought would share this link. http://www.instructables.com/id/... It shows how to put a...
Thursday, 23 May 2013 - 18:42
A simple multitasking project using Salvo Tiny
Announcing my first project, it blinks 8 leds at different rates using a cooperative RTOS call Salvo. Use the project as a starting point for your own applications. https://www....
Saturday, 23 February 2013 - 01:12
Unable to activate watch window v4.19 b730
When running in debug mode, I can add watch items and open/close the watch window but I'm unable to view array items. The window ignores mouse clicks. Let me clarify, I run in...
Wednesday, 18 July 2012 - 15:00