Post Created date
Error: relocation truncated to fit
Dear theusch, You got it right, thank you very much. Indeed, that line was the problem. Looking again at the first post in this thread it is clear that I had the exact same issue...
Saturday, 5 July 2014 - 09:58
Error: relocation truncated to fit
Ok, so I've tried avr-gcc 4.8.1 (I took the .tar.gz toolchain for 8bit AVRs from the AVR website): avr-gcc --version avr-gcc (AVR_8_bit_GNU_Toolchain_3.4.4_1229) 4.8.1...
Friday, 4 July 2014 - 18:03
Error: relocation truncated to fit
That's what I had installed from last year and did not bother updating as they have been working fine until now. Is there any known issue with those tools? Do you have any...
Tuesday, 1 July 2014 - 19:39
Error: relocation truncated to fit
Hello, I'm trying to compile some assembler code that uses the AES engine of the XMEGA256A3U, using something like the following: aes_encrypt: // do something ... // Z...
Wednesday, 25 June 2014 - 21:27
ATXMEGA256A3U and AVR Dragon [cable too long]
Thank you very much Jörg. Indeed reducing the length of the 10-pin ribbon cable has solved the issue (almost). Now I can perform everything, from memory read/write to chip erase...
Monday, 23 April 2012 - 08:43
ATXMEGA256A3U and AVR Dragon [cable too long]
Hello again, First of all, please give me some comments about your experience with the ATXMEGA256A3U (or similar XMEGA devices) and AVRDragon if anyone has been using this...
Wednesday, 11 April 2012 - 17:10
ATXMEGA256A3U and AVR Dragon [cable too long]
It seems I was a bit too optimistic. I can read fuse values, but the AVR Dragon is unable to erase the chip: Quote: avrdude: erasing chip avrdude: jtagmkII_chip_erase(): Sending...
Friday, 6 April 2012 - 14:29
ATXMEGA256A3U and AVR Dragon [cable too long]
After some troubleshooting and testing (or Divine inspiration) I found a solution. In short: use 1.8V to power the XMEGA rather than 3.3V when using the AVR Dragon via JTAG/USB....
Wednesday, 4 April 2012 - 17:02
(Outdated) Script for building AVR-GCC 4.5.1 on Linux
Thanks Bingo. I have added a patch for the bug and I see the bug has now been fixed for GCC 4.6. Also I updated my script to use this patch. Maybe we can make a complete list of...
Monday, 14 February 2011 - 21:01
(Outdated) Script for building AVR-GCC 4.5.1 on Linux
Hi bofh, I am happy to hear you can use them as well. Regarding the bfd problem, you should install libbfd. In ubuntu this is solved by installing binutils-dev, as mentioned in...
Thursday, 10 February 2011 - 16:24
Help in building a new installation script
Sorry for not replying sooner to this. I am not disabling multilib anymore as far as I know. The issues have been fixed already, see the other link for the complete details:...
Thursday, 10 February 2011 - 16:19
(Outdated) Script for building AVR-GCC 4.5.1 on Linux
Nice to hear about the correct file. Thanks.
Thursday, 27 January 2011 - 13:28

Pages