Solved: Help on a simple exersise
for (i=0; i=LED_BLINK_TIME; i++) // iterate 50 times, 50 x 10ms = 500msDon't you mean:
for (i=0; i<LED_BLINK_TIME; i++) // iterate 50 times, 50 x 10ms = 500ms
nRF24L01 working program for Atmega 328p You need to raise and lower both pins in operation. Since you can do that, you have first step working. Second is to get SPI working.
For want of any good reason, my NRF...
Tuesday, 8 October 2019 - 14:14
nRF24L01 working program for Atmega 328p Well, let's see...
Most of the examples are pretty straight forward. What might you be missing?
Your NRF modules are almost certainly counterfeit parts that actually...
Boggles the mind! Was one of the new products in Digikey's email. Couldn't get digikey to respond to the link as our corporate network is now globally administered and rather flaky. Did not keep...
Thursday, 3 October 2019 - 14:09
Prototype PCB Manufacturer - Recommendations Wanted Kartman wrote:
jlpcb - had a few pcbs done with them. no complaints. Don't use the SF global shipping 3-5 days actually was 10 days. DHL has not let me down.
I'll...
Thursday, 3 October 2019 - 14:05
AVR generated 12v pulse, just for fun Should some evil, barefooted brat point out Roman Black's work? http://romanblack.com/smps/conv.htm
I built one of his buck regulators to see if I could, grabbing...
Thursday, 3 October 2019 - 14:03
Just remember..... jgmdesign wrote:
From my always entertaining friends on Facebook.......
Let the Snarking Begin!
JIm
I represent that remark!
for (i=0; i=LED_BLINK_TIME; i++) // iterate 50 times, 50 x 10ms = 500msDon't you mean: for (i=0; i<LED_BLINK_TIME; i++) // iterate 50 times, 50 x 10ms = 500ms
Structs and Arrays and Matrices Oh My! Structs and Arrays and Matrices Oh My!
I agree. Sounds like a code problem.
You need to raise and lower both pins in operation. Since you can do that, you have first step working. Second is to get SPI working. For want of any good reason, my NRF...
Well, let's see... Most of the examples are pretty straight forward. What might you be missing? Your NRF modules are almost certainly counterfeit parts that actually...
JCLPCB Yes. That's the place. Unrememberable string of letters.
Was one of the new products in Digikey's email. Couldn't get digikey to respond to the link as our corporate network is now globally administered and rather flaky. Did not keep...
Kartman wrote: jlpcb - had a few pcbs done with them. no complaints. Don't use the SF global shipping 3-5 days actually was 10 days. DHL has not let me down. I'll...
Should some evil, barefooted brat point out Roman Black's work? http://romanblack.com/smps/conv.htm I built one of his buck regulators to see if I could, grabbing...
jgmdesign wrote: From my always entertaining friends on Facebook....... Let the Snarking Begin! JIm I represent that remark!
Better show some sort of schematic so we can see what's setting the interrupt off.
What's wrong with SANDU protocoll? (Something Awneil dreamed up)
Pages