Post Created date
Seeking advice regardng choice of programmer.
+1 on the Atmel Ice, inexpensive and covers both 8-bit and 32-bit processors.
Tuesday, 16 December 2014 - 19:33
How to sinc two microcontrollers
I had thought about making a LA a while back and the problems wasn't so much capturing data but how to display it.  It turned out better in the long run, for me at least to...
Tuesday, 16 December 2014 - 06:19
How to sinc two microcontrollers
I'll answer your question with a question and maybe one of the pros on here can prove or disprove.   If you set the CKOUT fuse on one of the processors and use it as clock...
Monday, 15 December 2014 - 21:45
HELP: 74hc595 library randomly shifting bits SOLVED
The code looks like it should be OK so I would recheck the connections?   Yeah a scope or logic analyzer is really helpful.  I have a Saleae LA that I use all the time...
Sunday, 14 December 2014 - 21:02
HELP: 74hc595 library randomly shifting bits SOLVED
Try putting a delay to keep clock high, depending on speed of processor I've found this is a factor.   void shiftPulse(){//Pulse the shiftClock line shiftPort |= 1<<...
Sunday, 14 December 2014 - 19:59
AVRISP MKII
In Device Manager your AVRISP MkII device driver has problems as designated but the warning shield in the photo, you need to fix this before anything will work!
Wednesday, 10 December 2014 - 18:18
Isn't AS 6.2 insanely large?
VS 2010 with large web site solution loads 119K in ~10secs VS 2013 Community Edition with a minimal solution loads 102K  in ~15sec. AS 6.2 with minimal solution 438K and...
Monday, 8 December 2014 - 15:31
new scope - Rigol DS1054Z
I just got a 1052E a few weeks ago and really like it.
Thursday, 20 November 2014 - 23:01
Hex code intended for atmega168, can it be burned on atmega328?
Although it will run I don't believe you will be able to program it due to the device signatures being different?  ATmega168P 1e940b ATmega168 1e9406 ATmega328P...
Tuesday, 18 November 2014 - 22:26
MCP23S17 question
Chuck99 wrote:   mike32217 wrote: I can power with 3.3V and 5V on the I/O pins won't hurt it?     Voltage on all other pins with respect to VSS (except VDD...
Friday, 31 October 2014 - 21:59
Forking/Branching a Project/Solution
My vote is for SVN also, I've used it for years and it's by and far the easiest, I did try Git and others but they weren't near as intuitive.   Another reason to use SVN is...
Thursday, 30 October 2014 - 18:52
Arduino Due and C++
Thanks clawson got the answer I needed to solve the problem and it works but what a PITA to have to go through. I remember going through a similar gyration when AS first came out...
Thursday, 23 October 2014 - 12:31

Pages