Post Created date
Python book recommendations
EdX Intro to Python might be a good place to start.   Also 2nd on PhCharm, very good IDE.  
Sunday, 17 April 2016 - 18:32
Random notes about using SVN, Atmel Spaces and maybe other things
Cliff,   I have used TortoiseSVN on Windows for many yeas and have a huge amount of data stored in my repository.  It has not only been a life saver but I use it quite...
Wednesday, 13 April 2016 - 15:00
Keysight Bench Power Supply
I got a surplus BK Precision 1660A from ebay for less than $100, with shipping and have been very happy with it.    
Friday, 18 March 2016 - 16:39
Learning assembly. Starting from AVR
Another source that might help you is AVR Assembler 101
Thursday, 31 December 2015 - 00:08
Memory Allocation of Pointers and Arrays
You're writing out CommandString every second but it looks like you need a way to tell it you've already read it.  Some sort of flag should do the trick!
Friday, 4 December 2015 - 17:21
Clock question
joeymorin wrote:I would recommend you restore the fuses to use the external crystal, but also program CKDIV8. This will cause the AVR to power up at 2 MHz. Then early in main()...
Wednesday, 11 November 2015 - 21:11
Clock question
ka7ehk wrote: "Working" at 5V, not at 3.3V is suggestive of excessive (too high) clock frequency.     But, there are other possible reasons. Do you have any other logic...
Wednesday, 11 November 2015 - 20:05
Clock question
ka7ehk wrote: There is no "internal 8mHz xtal". This statement is incorrect in at least two ways:   1. mHz is milliHertz (1E-3Hz = .001 Hz). You surely mean MHz (megaHertz,...
Wednesday, 11 November 2015 - 17:30
8 or 16MHz, how tell it to the 328 chip?
I am running an ATMega328P at 3.3V and 16MHz in a project I just finished just fine.
Wednesday, 28 October 2015 - 01:54
LED Blink with Timer/Interrupt
You need to set the clock TCC1B bits CS0 - CS2 to the desired prescaler, as it it with no clock selected the timer/counter is not running
Tuesday, 13 October 2015 - 15:20
Is there a list of default fuses by device id someplace?
I think Engbedded Atmel AVR® Fuse Calculator might be of help!
Thursday, 17 September 2015 - 16:09
Nice Multimeter probes.
Ordered a pair, thanks for the link!
Monday, 7 September 2015 - 01:07