Post Created date
Converting Arduino Nano Chinese Clone to 3.3V
that would work too, just replacing the LM1117 5 with LM1117 3.3 but I am attaching circuitry with the nano which will blow up at 5V, the ESP8266 and other stuff... so I cannot...
Monday, 12 January 2015 - 08:25
Converting Arduino Nano Chinese Clone to 3.3V
buying stuff from online vendors is still not a norm here and until about a year or 2 back the Arduino etc were not very common here, we even made a USBaspLoader board locally,...
Monday, 29 December 2014 - 10:49
Converting Arduino Nano Chinese Clone to 3.3V
well, I can easily get like 10 Nanos from China, all having the same CH340 IC and cable in about 32$ As for other things, the seller has been sending me stuff which works and it...
Monday, 29 December 2014 - 10:18
Converting Arduino Nano Chinese Clone to 3.3V
here, where I am, Pakistan, the exchange rate is a simple multiplication of USD by 100 to get our currency and 1000$ for even a months salary is a dream many still dream... and...
Monday, 29 December 2014 - 09:02
Where can I download the AVRTOOLBOX
but if you are NEW, just head on over at http://arduino.cc/ and download their IDE, buy an Arduino board, Chinese clones work the same and cost a couple of bucks only... so...
Monday, 29 December 2014 - 08:56
Where can I download the AVRTOOLBOX
AVRToolbox.... this is new... I found these links https://code.google.com/p/avrtoo...   but I think you need to download the SOURCE of this project repo https://code.google....
Monday, 29 December 2014 - 08:54
Converting Arduino Nano Chinese Clone to 3.3V
so i was planning to use the same approach as this guy: http://www.ba0sh1.com/tutorial-3... Assuming I dont change the crystal and keep it at 16MHz   So the other way is...
Monday, 29 December 2014 - 08:50
Converting Arduino Nano Chinese Clone to 3.3V
what about 100 to 500 units...? I have some plans for making a couple 100 modules with such 3.3V nanos on them. As any solution I design which has an AVR and USb-to-Serial chip...
Monday, 29 December 2014 - 08:43
Converting Arduino Nano Chinese Clone to 3.3V
I am planning on using ESP8266 wifi module and other modules most of which are 3.3v compliant and I was tired of always needing to use level converters and etc in between......
Monday, 29 December 2014 - 08:34
Converting Arduino Nano Chinese Clone to 3.3V
david.prentice wrote: Shirley,   you just put a diode in the Vin line.    Then the Lithium battery cannot back feed into the USB and vice-versa. ...
Monday, 29 December 2014 - 08:28
AVRs in Actual Commercial Products
Kartman wrote:Has been asked and answered before. Try a search. tried searching, maybe I can't use the forum search properly, google gave a couple of links.. https://www.avrfreaks...
Friday, 14 December 2012 - 09:57
Difference bewteen phase correct and fast PWM
from the image and the discussion, I GET the difference between fast and phase correct pwm - though now I am inclined to call it edge aligned and centre aligned... Can someone...
Thursday, 13 December 2012 - 14:12

Pages