Post Created date
Need something to generate an audible alert with ATmega128
@Neil: that is true, the one I used could eat 50mA and if you don't restrain it I think it could easily eat a whole hundred without choking on it. I used a resistor to limit the...
Monday, 17 July 2006 - 11:57
Design of custom LCD glass
Quote:the actual design is almost incidental! That explains why all custom VFD's in car radios and the such look so apocalyptically awful :D
Monday, 17 July 2006 - 11:51
RF communication
From what I've found, a typical Aurel OOK transciever module can be used as half-duplex PHY for USART. That is, no additional firmware, except for properly handling of duplexing,...
Monday, 17 July 2006 - 11:46
RF communication
Quote:There site seems to be broken... Hmm, should we introduce new term, "avrfreaking", akin to "slashdotting"? Because it looks like we just avrfreaked aurel.it down, in the...
Monday, 17 July 2006 - 00:23
RF communication
@daqq: wow, thanks for pointing the Aurel out! Looks very nice and cheap. I even found a local distributor. Do you have any experience with them?
Monday, 17 July 2006 - 00:11
64-bit division, C/asm mix
Thanks for the compliment. But the code, except for C-embedding and some initial values is not mine. The original is linked in my original posting. That explains its compactness...
Saturday, 15 July 2006 - 10:02
64-bit division, C/asm mix
Thanks Jim! I had no idea about 256 bytes of ram, that's just awful! I just checked and turns out that simple ++ and << operations take awful lot of funny wrongdoing.
Saturday, 15 July 2006 - 00:16
AVR - wiki ? A good idea?
Quote:this has to be the _slowest_ loading webpage I have ever been to AVRFreaks must consider using something faster than ATmega's for their servers ;)
Friday, 14 July 2006 - 18:11
AVR - wiki ? A good idea?
Quote:Oh, but the knowledge you pick up during the journey is priceless. Sure, when you have time to read through it. That you can do more or less randomly, with any threads that...
Friday, 14 July 2006 - 18:06
Help! Can i youse the UART and the 8 pins on the same port?
Not sure which ATmega we're talking about here, but I've yet to find one where you can't. So the answer is: yes, of course, you can use other pins on PORTD for I/O. Just make sure...
Friday, 14 July 2006 - 15:52
AVR - wiki ? A good idea?
I love this site more than anything on the internet. But when it comes to digging up information, I really prefer Wiki. It's pretty volatile: there is info, or there is no info,...
Friday, 14 July 2006 - 15:50
Need something to generate an audible alert with ATmega128
There are also "active buzzers", they only need DC voltage and they generate a tone on their own. If all you need is beep beep beep, they're the best.
Thursday, 13 July 2006 - 15:08

Pages