Type in the full discussion title or a part of it.
Discussion Title Created date
ATmega328P - what to do without full swing crystal oscillator ?
Hello all !   I am running a project on an 'old', pre-Rev.K, ATmega328P using a full swing crystal oscillator clocked @ 11.0592 MHz. This makes a perfect UART @ 230800 bps...
Sunday, 13 November 2016 - 17:29
Strange issue using printf with USART
I have recently ported a perfectly running code from AVRGCC to Atmel Studio 7.0 and I have encountered a strange problem concerning the use of printf when printing strings to...
Saturday, 7 May 2016 - 11:21
Load sharing (power supply + battery) question
Hello all ! I would be grateful if you can give me your advice on the following issue : I have built a load sharing circuit between an external 5V power supply and a Li-Po 3.7V...
Wednesday, 10 April 2013 - 15:49
Unconnected ADC6 and ADC7
My question is simple : I am not using these pins and since they don't belong to any PORT (in order to make them inputs and enable the pullup resistor), should I leave them...
Thursday, 3 January 2013 - 15:06
Multiple UART connections
I would appreciate if you could give me some insight on multiple UART connections, because I think that my knowledge is limited at this point. I am running an ATMEGA328P @3.3V,...
Wednesday, 26 December 2012 - 11:42