Type in the full discussion title or a part of it.
Discussion Title Created date
Attiny10 and ADC at 1.8V VCC
Just seen in the datasheet of Attiny10, that ADC VCC range is 2.5-5.5V. But MCU itself is powered from 1.8V. Seems at 1.8V VCC it is not allowed to use ADC?    
Thursday, 29 September 2016 - 11:54
Offset compensation for differential ADC inputs
Hi All! In my Lipo charger I measure current across shunt resistor by reading ADC value from differential channel. For accurate measurements I do offset compensation value reading...
Monday, 13 August 2007 - 15:45
PonyProg vs ATtiny13
Does sombody can program ATtiny13 with PonyProg? I have version 2.06f and here is not possible to do this... Thx! Pavel
Wednesday, 14 June 2006 - 16:12
ADC differential channel with gain 1X problem on ATtiny26L
Hello All! I built currnet meter by meashuring voltage drop on resistor 0.27 Ohms. Resistor connected to ADC0/ADC1 and MCU configured to read not gained difference of voltages on...
Monday, 12 June 2006 - 09:51
NiMH battery automatic discharge
Hi All! I build own charger and want to implement discharge function. I plan to connect discharging resistor in parallell to battery with transistor - so I can swith on and off...
Saturday, 4 February 2006 - 07:10
NiMH Battery charger with Attiny26 (max voltage?)
Hi! I tried to do subj, but little bit confused with charging parameters. I try to charge 1 NiMH cell (1.2v) with capacity 2000mA. When I measure current, what I draw to cell and...
Wednesday, 1 February 2006 - 13:35
AVR450 ATtiny15 assembler - is sowtware correct?
Hi All! I've builded NIMH charger from app AVR450 with ATtiny15 and program code in assembler. I have searched this forum and fixed errord in app. For now I fixed 2 errors: 1....
Saturday, 14 January 2006 - 08:04
Bluetooth chip (may be litle offtopic)
Hi All! I think about transmitting data wireless. At first I want to replace basic USB cable with Wireless communication. Does somebody knows some chip for Bluetooth operation? I'...
Thursday, 8 September 2005 - 06:09
NOKIA 3310 (PCD8544) Library in Assembler - not C
Hi All! I googling the internet and our forum but did't find subj... Maybe somebody know wheer I can get it... thanx! Pavel.
Wednesday, 15 June 2005 - 13:43
Using reserved ports for data storing
Hi All! I remember, that this kind of question was descused here, but I can't find this discusion again. I need to store some data in MCU like in registers. All registers I...
Monday, 14 March 2005 - 09:22
MCU goes to SLEEP (Idle) mode without any sleep command
It's interesting, but some times MCU (AT90S2313) goes to Idle mode when he run in interrupt routine without any sleep command. Of course, in Datasheet says that you must set SE...
Friday, 29 October 2004 - 15:37
UART transmit with EEPROM read
Hi All! When I read something from EEPROM, then CPU halts for some cycles. But what happens with UART transmitter, if he shifting byte from temporary register out at the same time...
Saturday, 2 October 2004 - 07:47