Post Created date
Xmega ADC limitation
****!! i did sheck the A1 not A3 datasheet sorry trevor :oops: [post edited - do not use profanity here - also research answers before posting - the only thing worse than no...
Friday, 5 February 2010 - 12:29
Xmega ADC limitation
trevor_g wrote Quote: Not sure where you get that from. According to the main part of the datasheet INL is +/- 5LSB @ 500 ksps. i did get it from the errata section in the...
Friday, 5 February 2010 - 12:24
AVR with Solid state relay
use a transistor to controll a relay.
Friday, 5 February 2010 - 10:51
AVR Raven and the older STK500 Board
the at90usb devices have a preinstalled bootloader programeble over ther usb. :wink:
Friday, 5 February 2010 - 09:15
Xmega ADC limitation
the inaccary is 2LSB+- at 3V as reference and it's lower if the reference is lower.
Friday, 5 February 2010 - 09:06
AVR Raven and the older STK500 Board
if you are really handy you can solder on some cabels directly on the at90usb1287 and connect it to stk500.
Thursday, 4 February 2010 - 21:23
Xmega ADC limitation
xmega have a 12bit adc with 2msps sampling.
Thursday, 4 February 2010 - 07:09
Help requested for RC5 based IR Rx.
sorry
Monday, 1 February 2010 - 19:02
Help requested for RC5 based IR Rx.
wow!! that is a lot of code for a simple thing in bascom it's only 5-10 rades of code to recive rc5 i don't understand why everybady are using c.
Monday, 1 February 2010 - 09:01
LCD interfacing
doesn't c have prewritten command for lcd:s like print ,lcd write or something like that
Monday, 1 February 2010 - 08:55
power circuit
is a 10bit adc enogh for that [edit] oops i didn't check our schematic i did think you used the resistive way to monitor the heart
Monday, 1 February 2010 - 08:44
power circuit
it whas meant for jayjay that said that avr:s runs at low as 1,8v.
Sunday, 31 January 2010 - 17:51

Pages