Post Created date
Add new ATmega328pb to AVRStudio4 and WinAVR
I thought it was simple, well, I hope also with AVRstudio4
Sunday, 31 January 2016 - 10:40
WinAVR 20100110 memory use summary
------ Build started: Project: terminal2, Configuration: default AVR ------ Build started. Project "terminal2.cproj" (default targets): Target "PreBuildEvent" skipped, due to...
Monday, 9 December 2013 - 00:33
WinAVR 20100110 memory use summary
I try to compile with AS6 but i have this error terminal2.elf section .text will not fit in region textregion text overflowed by 1006 bytes make: *** [terminal2.elf] Error 1...
Saturday, 30 November 2013 - 15:21
WinAVR 20100110 memory use summary
clawson wrote: To be honest you might be better off simply upgrading to AS6.1 which includes avr-gcc 4.7.2. I've seen that it's better ma AS4 is lighter and faster, and i must do...
Thursday, 28 November 2013 - 23:21
WinAVR 20100110 memory use summary
Nothing.... with avrstudio 4.17.666 works, with avrstudio 4.19.730 nothing
Tuesday, 26 November 2013 - 17:39
Direc access to sram address
a long time since I was in avr freaks, there must come back more often .. there is a nice atmosphere here :)
Saturday, 28 September 2013 - 15:16
Direc access to sram address
sternst everything works perfectly, thank you all, I have to study more clawson, I have a copy in ram of a set of EEROM parameters that need to be close
Saturday, 28 September 2013 - 15:14
Direc access to sram address
i made some variation but the error remain i don't know if in write o read function highest byte[3] e higher byte[2] are always 0xFF , the lower byte[0] and high[1] are correct...
Saturday, 28 September 2013 - 13:41
Direc access to sram address
unfortunately I do not know how you do, please can you show me? I found an error with..... uint32_t ram_par_read_dword(uint8_t addr) void ram_par_write_dword(uint8_t addr,uint32_t...
Saturday, 28 September 2013 - 13:21
[TUT] [C] GCC and the PROGMEM Attribute
I saw that the compiler always puts constant from address 0x26 (ATmega8), then fine by me, I did as you told me you and alexan_e thankss!
Thursday, 13 December 2012 - 18:54
[TUT] [C] GCC and the PROGMEM Attribute
mmm, eprom? YES , can be a possible solution... i must think...
Thursday, 13 December 2012 - 18:24
[TUT] [C] GCC and the PROGMEM Attribute
I'm afraid that the compiler can change the position of my constant every time I change the firmware ..sig!
Thursday, 13 December 2012 - 18:22

Pages