Type in the full discussion title or a part of it.
Discussion Title Created date
Is there something simpler than a PLL?
I'm working on a low latency IR light curtain.   On the receiver side, I need to extract a 4 Khz synchronization pulse from a 10% duty waveform that has lots of phase jitter...
Sunday, 1 January 2017 - 14:57
Debug programmed code without loading new code.
I'm trying to debug an issue that I'm pretty sure is a result of having a wrong (inconsistent) value of a symbolic constant defined.   The relevant code is:   #define...
Tuesday, 22 March 2016 - 18:52
Big decap, coin cell battery, No BOD = Corrupted Flash?
I have a new design using an ATtiny24.  It's very similar to other designs I've done, just the ATtiny talking to an NRF transceiver.  Those have had hundreds of hours of...
Friday, 19 February 2016 - 00:27
Stop/Start Attiny25 Timer PWM in desired state
I'm using timer1 on an Attiny25 configured for pwm mode with OC1B.   The timer is set up so the associated PB4 goes high on counter hitting TOP and low on compare match....
Sunday, 5 July 2015 - 11:07
SOLVED: Studio Simulator Questions
I'm just learning how to log registers and have a couple of questions.   First, it seems like Studio keeps appending the log file.  Is there a way to clear the records...
Friday, 3 July 2015 - 19:39
Studio 6.2 Simulator--Does PORTB show state of OC1B if its configured as output?
Before I send off gerber for a set of new cards, I figured I'd try using the simulator in Studio 6.2 to make sure the TDM implementation of IR emitters/receivers I have in mind...
Thursday, 2 July 2015 - 23:52
Does Studio 6.2 Simulator support waveform output?
I don't see a way to get an waveform output versus time using the Studio 6.2 simulator, but I thought maybe its there and I just can't find it.   By waveform output, I mean a...
Thursday, 2 July 2015 - 21:10
Terminating Direct Wire to Board IDC connectors
I'm starting a new project for a very low latency light curtain.     One side of the curtain will have emitters, the other receivers.   There are set of 10-15...
Tuesday, 30 June 2015 - 18:38
How to automatically build multiple configurations of same project
Ok, so this is probably a newbie type Studio question, but I can't seem to figure out how to do it...   I want to build two targets every time I do build solution.  The...
Tuesday, 19 May 2015 - 11:26
Failure to Enter debugWire Mode
I have a lot of problems getting into and out of debugWire mode.   I suspect others may have similar issues.  However, when it DOES work, its important to follow a set...
Friday, 15 May 2015 - 17:15
Failure to Enter debugWire Mode
I have a lot of problems getting into and out of debugWire mode.   I suspect others may have similar issues.  However, when it DOES work, its important to follow a set...
Friday, 15 May 2015 - 17:15
Error while SPI programming
Just started getting the  error below while SPI programming and 328P using AVRISP II in AS Studio 6.2:   Flash gets programmed ok.  There's actually no EEPROM...
Thursday, 14 May 2015 - 10:36

Pages