Post Created date
Atmel ICE -- waste of money??
westfw wrote: For this chip(Atmega328P) and the debugWire method of debugging, the $90 Atmel ICE has no advantage over the $10 board. Could be.  The $10 Xplained mini is...
Monday, 4 February 2019 - 08:29
AVR-IoT WG Battery charger problem
Hi AVRaidire, The battery charger MCP73871 is a standalone charger and the firmware in the ATmega4808 or the on board debugger does not configure it in any way. As you say, it...
Thursday, 24 January 2019 - 09:45
AVR-IoT WG question
The "Curiosity Drive" it self is part of the on board debugger and not related to the actual application code running in the ATmega4808. Can you provide me with the content of the...
Thursday, 17 January 2019 - 12:39
mEDBG tool not appearing in ATTiny1616 project
The mEDBG debugger has been known to program/debug many different devices for a while now. A freaks member figured out that the mEDBG firmware is not encrypted, and is configured...
Monday, 10 September 2018 - 08:42
Web link(s) from Atmel Start to product pages broken
I had some "fun friday" and updated all the links in the windows that pop up in Atmel Studio (and MPLAB-X) when a kit is connected. You can update it by connecting a kit and...
Monday, 15 January 2018 - 10:09
ATtiny417 / ATtiny814 / ATtiny816 / ATtiny817
There are several reasons why the mEDBG does not perform to the same level as the EDBG/Atmel-ICE. I can't really list everything here, but the short answer is that the EDBG/Atmel-...
Wednesday, 1 November 2017 - 10:57
ATtiny417 / ATtiny814 / ATtiny816 / ATtiny817
El Tangas wrote: About the encryption, it seems only the "good stuff", like Atmel-ICE firmware, is encrypted. Oh no, you figured out our big secret that the mEDBG is not...
Wednesday, 1 November 2017 - 07:42
Atmel Studio Unknown Board: SAMG55 Zero Touch Secure Provisioning Kit for AWS IoT
Someone™ may have forgot to publish the updated file, you can try the "update board database" button again now. As meolsen pointed out this purely an information page and...
Thursday, 26 October 2017 - 14:08
Improved Atmel_ICE USB Connector (Strength Issue)
steve17 wrote: I've been using the ZX62D-B-5PA8 without the (30) at the end.  They look a little different than the picture in your link. Hirose changed the vendor they use...
Wednesday, 8 March 2017 - 08:53
Improved Atmel_ICE USB Connector (Strength Issue)
JoniS wrote: Well i can share pictures from one dated to 2014.05.06(first) i believe, if it had as good solders i bet it did not need glue all around. This is the original SMT...
Monday, 6 March 2017 - 15:21
Improved Atmel_ICE USB Connector (Strength Issue)
PhosBronze wrote: I just bought an Atmel-ICE and out of curiosity I popped the covers to see if it had an improved connector. I don't know what the old, apparently flimsy one...
Monday, 6 March 2017 - 15:18
AVR Dragon vs AVR-ICE
JohanEkdahl wrote: [*] Atmels design procedures stipulate that there must always be one weak point or flaw designed into every programmer/debugger. For the ATMEL-ICE it is the USB...
Wednesday, 22 February 2017 - 13:17

Pages