Post Created date
Sensor suggestions requested!
How about using a few cameras and running image analysis on a cheap computer? Scales well, is cheap, installation is simple, can reconfigure the room easily...
Wednesday, 14 September 2011 - 17:00
External target HVSP: Dragon vs. STK500
Thanks. I'll give both a try. Any other advice?
Thursday, 4 August 2011 - 21:49
Controlling analog strobe light
All of the parts finally arrived. The line (mono plug) to tie the strobes together was isolated from the mains power that drives the actual bulb section. The scope verified the...
Tuesday, 2 August 2011 - 03:27
Controlling analog strobe light
DocJC wrote:Well, understand all of the precautions that go with working on 120 VAC equipment...I certainly respect 120VAC. DocJC wrote: One approach, IF one were to pursue such...
Tuesday, 19 July 2011 - 20:12
Controlling analog strobe light
Thanks for your input. Here is the strobe I'll be using. DocJC wrote:I'm not sure you really want a low side driver. If the...
Tuesday, 19 July 2011 - 02:12
Identifying pin1 on SOIC component
If and only if there are no other markings reading the text left to right, pin 1 will be on the bottom left. For an SOIC-N package it should be: N SomePartText MorePartText 1
Wednesday, 8 June 2011 - 17:18
PCB fabrication Companies: My review
My latest GoldPhoenix order (from the 2-layer $110 special): I've been pleased with all of my GP orders so far and haven't really...
Thursday, 19 May 2011 - 19:54
Differential line driver unused outputs
Great thanks!
Monday, 11 April 2011 - 21:56
Power connector
ArnoldB wrote:And what rating do you need? I mean, what is the point in suggesting something without knowing what you need?I guess I wasn't very clear. The 12V/16A I had in...
Wednesday, 29 December 2010 - 00:48
USI in SPI Mode as Slave
You should probably also post your setup code for the ports, USI, etc. Are you monitoring the lines with a scope?
Friday, 10 December 2010 - 19:52
.1" Headers and breadboard
I use these:
Thursday, 25 November 2010 - 21:17
question regarding avr pocket programmer(sparkfun)
I'm a huge fan of Sparkfun and they only sell stuff they truly think is good product and useful for fellow geeks. However, I agree with MBedder 100%. The AVRISP MKII is only ~$35...
Saturday, 13 November 2010 - 17:55