Type in the full discussion title or a part of it.
Discussion Title Created date
UART and Modbus....
I use atmega16 and its UART for communication with other device.... Now, I have one sensor which has output configuration as below: Digital Output : Serial (9600 baud UART)...
Thursday, 9 September 2010 - 06:49
Will Atmega128L work on external 16Mhz crystal if Vcc=5V???
I have seen the in the datasheet about the speed grade of atmega128 and 128L....clearly states the difference in speed.... But someone told me that if Vcc=5V to atmega128L then...
Wednesday, 7 July 2010 - 12:15
16bit 3 pwm channel....
I am using Atmega16 controller for my project which is having 2 16bit pwm channel OC1A and OC1B...but I need 3 16 bit pwm channel...is it possible to have it in atmega16? Or can...
Saturday, 3 July 2010 - 18:01
UART between at90usb162 and atmega16
I am trying to use UART to communicate between at90usb162 and Atmega16....I can communicate one way mean half duplex when either of one is transmitter and other is receiver.......
Monday, 22 February 2010 - 05:51
This RF module with AVR!!!!
I have interfaced 433Mhz rx-tx modules with AVR using UART.....but their datarate is somewhat low around 2400bps... Now I found this RF module datasheet which supports 500kbps.......
Friday, 19 February 2010 - 11:39
can anyone explain this condition???
Please explain these conditions...if I want to write it differently....using if/else....can anyone explains it in words...I have tried but not sure... 1. while (!(UCSR0A & (1...
Saturday, 13 February 2010 - 11:05
Is it possible!!!! at90usb162 doing serial + USB...
I have established wireless RF link between atmega16 and usb162 using Tx-Rx 433Mhz... I have connected Rx-433 to RXD (pin eight) of 90usb162...I am able to get data from atmega16...
Wednesday, 10 February 2010 - 17:03
at90usb162 and at90usb1287..
I want to discuss following thing: at90usb162:"¢ Support full-speed "¢ 176 bytes of DPRAM "“ 1 endpoint of 64 bytes max, (default control endpoint) "“ 2 endpoints of 64 bytes max...
Wednesday, 20 January 2010 - 09:04
at90usb162--maximum data rate achieved!!!!!!
I am communicating between PC and at90usb162 with USB interface in Interrupt method...I used 8Mhz external crystal for external clock... My interrupt polling interval is 1ms...my...
Wednesday, 13 January 2010 - 09:08
interrupt and output port!!
I am using Atmega16 microcontroller...I am using interrupt0 (portD.2) in my program..I wondering that can I use portD(whole) as output and interrupt0 at same time in my program...
Wednesday, 2 December 2009 - 13:05
suspend action in at90usb162!!!
Dear all!!! I have using at90usb162 for pc to controller usb communication. It is working, but in my software program for usb162, somewhere I have to use wait statement often for...
Thursday, 19 November 2009 - 12:10

Pages