| Discussion Title | Created date |
|---|---|
|
Motes/Sensor networks... Hi, Anyone got experience with building their own motes? Is TinyOS still the way to go? Just interested in what people have done in this area... Thanks |
Monday, 2 December 2013 - 14:44 |
|
Getting going again... After a hiatus of a couple of years, I'm restarting my AVR 8-bit development environment from scratch... Previously I was using the winavr distribution... I know that AS 6.1 (beta... |
Thursday, 14 March 2013 - 09:39 |
|
8-bit WinAVR/avr-gcc/avr-libc Windows dev environment... Hi, Been away for a year... Looking to restart my AVR activities on Windows 7. For 8-bit development, are we still looking at the Jan 2010 WinAVR distribution with maybe a retro-... |
Friday, 21 January 2011 - 10:05 |
|
WinAVR status... Hi, A trawl through the forums didn't yield anything clear on this, though I may have missed it... I note that the Sourceforge project for WinAVR is now marked as "inactive". Is... |
Thursday, 1 July 2010 - 14:31 |
|
AVR40 and RESET ESD protection... Is this really true for the general case: Atmel app note AVR040 http://www.atmel.com/dyn/resources/prod_documents/doc1619.pdf, specifically section 4.9 with special note of 4.9.2... |
Monday, 28 June 2010 - 18:12 |
|
Audio input conditioning... I'm looking to design a small (physically) and preferably simple AGC to precondition a line audio input before it gets to a uP ADC or ZCD input. Lo-Fi is acceptable - what I'm... |
Tuesday, 20 April 2010 - 12:01 |
|
ATmega pulse generator... Hi, I need to generate pulse trains using a ATmega328 or similar - I have made up some carrier boards so I can play with these on a breadboard. Frequency is quite low - basic... |
Friday, 18 December 2009 - 19:30 |
|
Farnell buys Cadsoft (Eagle CAD s/w)... As the subject says - yesterday, Farnell (owners of Farnell, Newark and other brands), bought my favourite PCB package company for a reported 12M euros. Just hope they don't screw... |
Friday, 25 September 2009 - 14:04 |
|
Audio in to zero-crossing... Hi, Another small question if I may... I want to take an audio signal into a zero-crossing detector, i.e. to signal condition the drive (from an MP3 player typically) then to feed... |
Friday, 7 August 2009 - 15:03 |
|
Where to buy Atmega168PA in UK? Hi - Usual suspects (RS/Farnell/Rapid) don't have the above for sale - anyone know of a UK or any other outlet? I really need 20MHz @ 3V, so I need the newer versions... Thanks |
Monday, 27 July 2009 - 12:33 |
|
Differences between ATmega88/88PA etc... Hi, Are there any practical differences between the older ATmegaXX & the ATmegaXXPA versions? Are the pip-for-pin swapouts? I couldn't find anything obvious on Atmel's site... |
Wednesday, 22 July 2009 - 14:01 |
|
Using 20MHz ATmega as a pulse generator... I'm using an ATmega168xx @ 20MHz for an embedded ap, and was wondering if it would be suitable to use as a pulse generator? I have spare pins - my basic requirements are to... |
Wednesday, 22 July 2009 - 08:39 |