Post Created date
11.5V AC Dimmer
sorry to not be agree with all people but DC you will lost a lost of power in the bridge. AC will be a nive solution with a triac. You can do must more easyere than the solution...
Thursday, 13 April 2006 - 11:16
DIY Solder mask?
Sorry to aks. but how do you airbrush it? Compresor +++ ? It is seem very interesting solution. I do me proto with a CNC too and etse after boring (easyere for me to centre the...
Monday, 27 March 2006 - 16:41
What reason makes AVR unstable?
What about the RESET signal. Do you have a extern R& C. Just try 4K7 to Vcc/Reset and 100n to Reset/GND.
Wednesday, 8 February 2006 - 19:12
Schematic check
Yes agree with Wcrostron. Decoupling of analog part. Perhaps you can have a watch crystal with jumper on PC7 + PC6 nice to have to try later. MAX232 -> It is possible to use...
Tuesday, 3 January 2006 - 19:32
Communication between PC with Excel and Micricontrollers
Thanks I will try it and learn. Regard Thierry
Friday, 9 December 2005 - 09:07
Communication between PC with Excel and Micricontrollers
Dear Peter. I have try to find and use this function in excell but I am more HW than SW and it is a bit to long for me. Do you have a example of excell file som I can use to start...
Friday, 9 December 2005 - 06:29
how to use3V to control 12V/24V
And what not a transistor? http://www.elfa.se/pdf/71/071315... Thierry
Monday, 5 December 2005 - 10:25
Run an AVR with 6V !?
It was older version of AVR run to 6V. If You have 6V set a diode in serie...5,4 5,3V !!!! Thierry
Monday, 14 November 2005 - 09:43
AC motor speed controller.
I have done like project. It was a big fan with AC motor but not so big as your. Just 2 tips: 1) Start the motor in full speed (like say Tom about the torque) 2) The "zero...
Sunday, 13 November 2005 - 09:02
Possible to hook an 8GB flashcard to an AVR?
Thank Pascal. You have give important point to follow to choise the HW. I must find some MPGE2 encoder to make this work easy. Best regard. Thierry
Wednesday, 9 November 2005 - 11:02
Possible to hook an 8GB flashcard to an AVR?
Quote: For best transfer rate from AVR, I put the CF on the AVR memory bus. You can get burst rates into the card fo several MB/s, and quite long bursts (32+ sectors), if your...
Monday, 7 November 2005 - 09:37
X10 Home Automation Transceiver?
I am agree with you "Guillem." I have work with power line product ( CEBUS product) for smarth house solution. Yes it can works but so much problem and so expensiv. To day I will...
Thursday, 15 September 2005 - 07:04

Pages