Post Created date
expected '=', ',', ';', 'asm' or '__attribute__' before
Eventually I found where the problem is - there is in fact a mistake in the Atmel library timer16_drv.h. In the section where both timers 1 & 3 are enabled, the correct...
Thursday, 10 December 2009 - 00:08
expected '=', ',', ';', 'asm' or '__attribute__' before
After a bit of thinking - If the debugger skips over the first line, this is just because the compiler acknowledged that TIMER16_3 is used and executed the corresponding commands...
Tuesday, 8 December 2009 - 12:11
expected '=', ',', ';', 'asm' or '__attribute__' before
Funny stuff - I defined now U8 timer16_selected as external in timer16_drv.h and at the same time defined U8 timer16_selected in main.c as originator. This extended the scope of...
Tuesday, 8 December 2009 - 11:49
expected '=', ',', ';', 'asm' or '__attribute__' before
I am using the same Timer16_drv.h library, but in my case I am using both timers (BOTH_TIMER16). I am using all compare interrupts (a,b & c) on Timer3, and only the last one (...
Monday, 7 December 2009 - 14:39
[TUT] [C] Getting SD/MMC card working painlessly with FatFS
Thank you for all your great ideas, but the problem was, like David pointed out, in the wrong definition of the pointer ptr. Compiler didn't complain though, if it is one way or...
Monday, 30 November 2009 - 23:58
[TUT] [C] Getting SD/MMC card working painlessly with FatFS
Good for you, Mike. I guess you are running the original application, as in the tutorial. I have still troubles with my own program, where I just use f_opendir and f_readdir. Both...
Monday, 30 November 2009 - 10:21
[TUT] [C] Getting SD/MMC card working painlessly with FatFS
I am not using the uart console, so I cannot send the commands di, fi and fl. In the main.c, I put just a very short version of the original code: // Initialize disk #0 di_res...
Saturday, 21 November 2009 - 23:28
[TUT] [C] Getting SD/MMC card working painlessly with FatFS
I have just solved the problem with the disk_initialize() error - it was indeed a hardware problem. Since my CS pin is on the PORTG, blindly replacing the code from the tutorial...
Saturday, 21 November 2009 - 21:39
[TUT] [C] Getting SD/MMC card working painlessly with FatFS
Thank you for the great feedback. What I can see is that the disk_initialize() routine returns error (1). Does this mean that something is wrong with the hardware (pin mapping,...
Friday, 20 November 2009 - 23:45
[TUT] [C] Getting SD/MMC card working painlessly with FatFS
Does anybody made this work on Olimex AVR-TLCD-128CAN development board? I am simply trying to get the file names up on the LCD screen, but it seems that the Finfo is empty...
Thursday, 19 November 2009 - 22:56
Code for graphic LCD with minimum RAM
Hi Nasko, I agree with Bob that your questions are suitable for a completely new thread. Anyway, I can see out of your hardware that there are similarities with mine, so maybe you...
Wednesday, 18 November 2009 - 12:24
Code for graphic LCD with minimum RAM
Thank you for all the replies. The LCD is from a Palm PDA (PC0919WE07) and is what you call for "raw" LCD, reminding me very much of a CRT :) The original idea was that I use this...
Saturday, 10 October 2009 - 22:41