Post Created date
ATtiny15L and SPIEN
Good news, I was able to press each chip onto a DIP adapter and eventually program the fuses on all of them without any more soldering. Problem solved, still mystified.
Friday, 26 February 2010 - 07:55
ATtiny15L and SPIEN
I'm using Studio 4.15 build 623 for the STK500. The time to complain to Arrow is long past as I've held these chips for several years. Yes, I've confirmed, with high voltage...
Friday, 26 February 2010 - 07:30
mass neon tube lights
Would be really nice if OP signed on and stated where this tunnel is, and why (he) believed the lamps to be Neon.
Saturday, 21 June 2008 - 05:12
mass neon tube lights
Maybe I'm being overly pedantic. Is the tunnel actually illuminated by neon the noble gas (neon, Ne, 10)? I would not normally expect such. If not, then the question would seem to...
Saturday, 21 June 2008 - 03:30
mass neon tube lights
Neon for signage, I understand. But OP said lighting a long tunnel.
Saturday, 21 June 2008 - 02:09
Stacking H Bridges?
Is there a reason you don't want to use a beefier chip, like L298?
Saturday, 21 June 2008 - 01:54
wire length and resistance
Quote:I got enclosure and i am going to be mounting some connectors onto them and then using wires to connect to my PCB. Just want to no will that cause a problem or is it with...
Friday, 20 June 2008 - 07:12
mass neon tube lights
Neon? Where do they still use neon for lighting? Today it's usually mercury or sodium vapor.
Friday, 20 June 2008 - 07:03
help with CmuCam 2
Quote:and for the second question about the Commands. How do I send them to the camera?Which AVR are you using?
Saturday, 31 May 2008 - 22:07
Why are some projects password protected?
Quote:he sees nothing wrong in uploading a project that is password-protectedIs it actually a project and is not a coded (illegal) message?
Wednesday, 7 May 2008 - 05:03
Clamp on type connector for ISP programming
You described it very clearly! OP needs to find a connector with a gap just wide enough for the board. Maybe he could put a 0.0125" shim on one side of a 0.1" pitch connector (gap...
Thursday, 28 February 2008 - 20:39
Clamp on type connector for ISP programming
Nice thing about a card-edge connector is that often you don't want components say 0.050" from the edge, but traces would be OK. If you have suitable ICs, you could consider the (...
Thursday, 28 February 2008 - 00:57