Post Created date
Does your main program send out RS232 data? If so then the windows program can get confused. I have a version at that closes...
Monday, 10 September 2007 - 19:33
Flex Proto PCB is probably as cheap as you'll get.
Thursday, 26 July 2007 - 11:11
Altimeter with Atmega16
I've recently been putting together an altimeter/ barometer project for hobby purposes. I used an MPX2102 sensor with a circuit to expand the needed range very similar to that in...
Friday, 13 July 2007 - 15:03
bootloaders, how do i use them?
There is bootloader code in CVAVR at which should help.
Friday, 13 July 2007 - 14:27
Digital barometer --- [Bascom AVR]
I would suggest putting a 10k trimmer between the power rails with the wiper to ADC0. Then the sensor output to ADC1. The Atmega16 could then be set up to read the differential...
Sunday, 10 June 2007 - 03:49
codevision wizard
The LCD code in the CVAVR examples folder gives details of the LCD connections.
Monday, 28 May 2007 - 13:06
Finding a good timing reference to adjust RTC?
Big Boy wrote:The accuracy of the RTC itself does not need to be THAT accurate. I'm aware of variations due to temperature, etc. I just wish to get as close as possible to the...
Saturday, 26 May 2007 - 14:59
Finding a good timing reference to adjust RTC? should be able to provide you with an accurate enough reference oscillator.
Saturday, 26 May 2007 - 13:00
ATmega644 - mysterious reset!
Koshchi wrote:One thing that you didn't mention is mega103 compatibility mode. The Atmega644 doesn't have such a mode.
Friday, 25 May 2007 - 15:57
Looking for a distributor in Africa...
Hi Markus, It might be worth ordering from Austria. . The prices are quite different from the site and shipping shouldn't be too horrendous. e.g...
Sunday, 13 May 2007 - 17:14
Bootloader for atmega16 help.
Wednesday, 9 May 2007 - 15:06
New site
clawson wrote: FAQ#1: ISR/main shared variables MUST be defined 'volatile' FAQ#2: an embedded program must NEVER return from main() FAQ#3: 99.9% of UART errors are AVRs not being...
Wednesday, 25 April 2007 - 14:32