Post Created date
Running AVRStudio on Linux
Thanks for the heads up. Although I'm not sure why wine would be too slow, since it's just an interpreter layer. I'm now just using avrstudio in VirtualBox and it's running just...
Tuesday, 8 February 2011 - 15:38
Problems with I2C on an ATTiny2313
Yeah, I have a 3.3K on SCL and a 2.2K on SDA (no reason for the differences, it's just what I had lying around). On the scope on SDA, the signal starts out at 0V before I turn on...
Tuesday, 4 January 2011 - 23:46
Running AVRStudio on Linux
I'm using arch linux (crazy, I know) and I've gotten AVRStudio 4.18 to run under wine 1.3.10, but when I try to connect to the programmer, it tells me it can't connect--here's the...
Tuesday, 4 January 2011 - 17:09
Tiny 2313 using PORT A instead of clock
turns out it is working correctly with those settings, I think I hadn't re-flashed. Thanks!
Wednesday, 21 April 2010 - 21:44
I'm a digital guy, not an analog audio guy...
Well that's good news if it proves correct. I'll check the actual voltages on the line. What is the standard voltage level for a commercial line-out (unamplified) audio signal...
Thursday, 11 March 2010 - 21:03
I'm a digital guy, not an analog audio guy...
I'm building an add-on board to an existing audio system, so I don't really have much control over the power coming in. I'm assuming I can find a +/- 1V power supply somewhere...
Thursday, 11 March 2010 - 14:29
Trouble copying an ATTiny45 to another ATTiny45
Ok, I understand now. The lockbits have been programmed, so even though it says I can read the device, since it's locked I end up with an empty .hex file (all 'FF's). And I can'...
Monday, 24 August 2009 - 20:04
Trouble copying an ATTiny45 to another ATTiny45
Yep, 100% of the time I read back the correct 0x1E 0x92 0x06
Monday, 24 August 2009 - 20:01
Trouble copying an ATTiny45 to another ATTiny45
So can anyone explain why I cannot un-program the RSTDISBL or the SPIEN fuses on a chip in HVSP?
Monday, 24 August 2009 - 19:45
Trouble copying an ATTiny45 to another ATTiny45
Sounds complicated with the bootloader. I believe the RSTDISBL fuse is set, because reading the chip with ISP doesn't give me the signature (that's what I mean by ISP not working...
Thursday, 20 August 2009 - 23:03
Trouble copying an ATTiny45 to another ATTiny45
I guess I should mention that this is the stuff I read out using HVSP. ISP couldn't read the device at all.
Thursday, 20 August 2009 - 18:27
Trouble copying an ATTiny45 to another ATTiny45
maybe you're right, the .hex file looks like: :10000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00 :10001000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0 :...
Thursday, 20 August 2009 - 15:58

Pages