Type in the full discussion title or a part of it.
Discussion Title Created date
TWI STOP not being issued (SOLVED)
NOTE: About 3/4 of the way writing up this post, I had my "Eureka!" moment and realized what was wrong with the driver.  Given the amount of time I have spent debugging this...
Thursday, 31 May 2018 - 03:23
ATXMega32E5 TWIC initialization problem (SOLVED)
Folks,   I'm trying to get a LED ring light working.  Basically, I have an ATXMega32E5 that decodes three rotary encoders and sends data to two TLC59116 16 channel LED...
Monday, 28 May 2018 - 16:36
xmega32C4 strange USARTC0 in SPI mode behavior (SOLVED)
Folks,   I've written a short test program to verify that USARTC0 in SPI mode on a ATXMEGA32C4 is working correctly.  I'm new to the xmega's and wanted to build up in...
Monday, 9 January 2017 - 02:16
Atmel Studio 7 can't see any programmers on one system, perfectly fine on second one. (Solved)
This is getting frustrating.   I did a clean install of Win10 on my main desktop computer a month or so ago (I am NOT a professional programmer, there are times I go a while...
Thursday, 2 June 2016 - 00:48
decoding serial stream with unknown protocol
Gents,   My on again, off again project to figure out how to "talk" to some Kawasaki Robotics M21 absolute encoders is, once again, on.   This are very nice encoders on...
Wednesday, 24 June 2015 - 18:27
Accessing the Port_t associated with a SPI_t
So I have a function that is passed a SPI_t as a function variable.  In that function, in addition to manipulating the SPI port (SPIE.DATA = blah for example), I also need to...
Sunday, 5 April 2015 - 19:51
ST7920 display using u8glib works on atmega328 but not on atxmega128A3U
I have a couple of 128x64 ST7920 based LCD displays.  Using u8glib, I have the "Hello World!" example running perfectly (along with the other examples).  As I have been...
Sunday, 22 March 2015 - 22:36
Oscilloscope image of clock out on any xmega at 32MHz
Gents,   First, I want to apologize if this isn't in the correct forum.  I didn't see anything that really fit, so I put it in this forum as the question is being driven...
Saturday, 14 March 2015 - 02:22
Power schematic from AT06068 question
Gents, First, I have to say that I am not sure if this is the right forum, but I can't find a SAM specific forum, so I though the AVR32 forum would be closest. If not, I would...
Friday, 5 September 2014 - 01:54
.eep file not being written during compile?
Gents, First, I am using AVR Studio 6.2.1153 (latest release as of this post) that is fully updated (just forced a check for updates this evening). The program compiles as I...
Monday, 1 September 2014 - 01:28
Help with understanding the linker and project setup
Folks, I'm using AVR Studio 6.2 and I am working on a few projects that are getting a bit more complex than the "hello world" projects, so I want to configure the project to...
Monday, 11 August 2014 - 20:58
Capturing and decoding a fast (but short) Manchester signal
Gents, First, I'm not 100% sure were this thread needs to be, so admins fill free to move if I screwed this up! Ok. I am TRYING to decode data from a Kawasaki Industrial M21...
Saturday, 5 October 2013 - 17:38

Pages