Post Created date
Programmer for the new ATTiny10
Hi Jim I would comment that TPI is just as much "in system" as the usual ISP on the other AVRs The tricky bit is designing the circuit such that the programming signals dont clash...
Saturday, 11 July 2009 - 12:23
An AVR in SOT-23 package
Quote: Is there any chance someone from Atmel product development or something like that will hear my plea and make a SOT-23 packed AVR...? Looks like your plea was answered this...
Thursday, 4 June 2009 - 13:20
ATtiny10 and STK600 Issues
Other questions for this topic: Did anyone else actually get hold of a stk600-tiny10? Is everyone else happy with running code on the Tiny10?
Thursday, 4 June 2009 - 00:25
ATtiny10 and STK600 Issues
If you are happy that the Tiny10 is now doing the things you command it to...job done! The intricatcies of each timer's PWM is a minefield that only careful manual reading can...
Thursday, 4 June 2009 - 00:03
ATtiny10 and STK600 Issues
I agree with the comment from theusch. Assuming you stop your PWM mode in the "high" state...old code left pin as output and led was on full brightness. Now when you stop your PWM...
Tuesday, 2 June 2009 - 17:13
ATtiny10 and STK600 Issues
Hi Bob That (clock speed) does sound like the cause. The clock is not counting, but PWM is still active..your "output compare" bits are still being compared and driven on to...
Tuesday, 2 June 2009 - 12:30
ATtiny10 and STK600 Issues
Hi Bob I have not seen any odd behaviour before, but might try out your "app" tonight to see. Debug suggestion one: PWM toggles output from High to Low to High etc Are you simply...
Tuesday, 2 June 2009 - 08:42
ATtiny10 and STK600 Issues
LED wise... I've got Led on Reset, Data and Clk. Each led is sent to 5V Vcc via resistor. Reset led goes on during programming Data led pulses at 8Hz (ish) Clock led stays in for...
Monday, 1 June 2009 - 20:06
ATtiny10 and STK600 Issues
Hi santacruzbob Yes, PB0 is data and RX+TX are commoned. Dont forget the CLK though. Tiny10 PB1 (pin 3 bottom left) is TPICLK, so this needs to be attached to tiny2313 PD2 (uart...
Monday, 1 June 2009 - 19:58
Programmer for the new ATTiny10
Well, it is $99 less outlay, but the time taken to implement non stk600-tiny10 solution is probably not worth it in most cases. It is usefull to those still without access to...
Sunday, 31 May 2009 - 01:29
ATtiny10 and STK600 Issues
My physical setup. Project does not appear to be in a "sale" condition yet. Tiny10 sample #10- placed on top of tiny2313 to highlight it's potential pcb benefits. MLF form of some...
Sunday, 31 May 2009 - 01:15
ATtiny10 and STK600 Issues
I think I've now fixed the bugs from previous version of my tiny10 programmer. NEW VERSION: 1) Bus contention bug fixes 2) Command "7" now programss and then reset release 3)...
Sunday, 31 May 2009 - 01:06

Pages