Post Created date
how popular is the 0-series?
I have been using TinyAvr0 TinyAvr1 series since released. I know several companies using many thousands of these a year, I think they are getting popular. They do not...
Saturday, 10 October 2020 - 17:11
EEPROM and ATTiny816
I know this is over a year old, but for those trying to squeeze code on TinyAvr1 TinyAvr0 series... Setting of NVMCTRL_ADDRL and NVMCTRL_ADDRH is not necessary. You can skip that...
Sunday, 20 October 2019 - 22:19
Do all new ATTINYs have TEMPSENSE on the ADC ?
glad I found this thread, the atiny1614 atiny3216 is missing all temperature sensor channel info in the datasheet. opened a support ticket with microchip to get the datasheets...
Sunday, 6 October 2019 - 04:58
avr-objcopy and EEPROM, removing 0x03 record.
curtvm, thanks very much, --set-start=0 did the trick... clawson, some hex tools that I use will throw an error if the 03 record exist and does not match the start address in the...
Sunday, 6 October 2019 - 00:42
AVR Errata - Unpublished, and other "Gotchas"
got it done,
Tuesday, 24 September 2019 - 01:41
attiny4 pgm_read_byte problem
curtvm, thanks, all viable solutions, but trying to keep existing libraries working, I did come up with a compiler script solution based on the redefine trick you mentioned...
Monday, 23 September 2019 - 23:21
attiny4 pgm_read_byte problem
curtvm, because I have tons of libraries already written that use pgmspace functions (I'm sure others do too). re-writing them all just for that chip does not...
Monday, 23 September 2019 - 15:50
AVR Errata - Unpublished, and other "Gotchas"
ATTINY1614   Datasheet says on pg337; "When the USART is set in one-wire mode, the transmitter and the receiver share the same RxD I/O pin."; (that is wrong) One-Wire pin is...
Monday, 23 September 2019 - 15:43
attiny4 pgm_read_byte problem
This is a direct note from the toochain pgmspace.h below, (entire pgmspace.h file attached from the toolchain) it appears pgm_read_byte is "supposed to work" for attiny4...
Monday, 23 September 2019 - 15:00
JMP instruction
thanks, looking around it seems their is many opcodes which intermingle the opcode bits, I supposed it's probably the way the mcu reads the bits to process the instruction.
Friday, 25 January 2019 - 01:41
first PROGMEM in lss gets marked as __trampolines_end opcodes
thanks clawson
Sunday, 20 January 2019 - 22:28
"for" loops not working with array
theusch, I cannot do a  vanilla setup in Studio7 because I use linux, sorry about that. I appreciate your help and info, avr linux setup is kinda like a "roll your own...
Monday, 3 December 2018 - 17:17