Can't compile samples from BitCloud (ZigBee) with WinAVR code-by wrote:Coud somebody explain why coordinator immediately found network after pressing SW1 button in Lowpower sample of Bitcloud SDK 1.5 even there no any powered meshbean...
Thursday, 4 June 2009 - 09:52
Can't compile samples from BitCloud (ZigBee) with WinAVR code-by wrote:
Now I search examples for zigbit to work w/o zigbit/bitcloud stack, because it consume much memory and it's difficult to make more flexible programs :)
Have a look...
Wednesday, 3 June 2009 - 08:35
Can't compile samples from BitCloud (ZigBee) with WinAVR code-by wrote:
When I use WSN Monitor, boards powered by battery shows values about 200 units, but when I insert battery function into lowpower sample, it shows -45, -50, -55, -60...
Tuesday, 2 June 2009 - 14:45
Can't compile samples from BitCloud (ZigBee) with WinAVR clawson wrote:Ah there's nothing like consistency! So even though everything else Atmel is Intel Hex they issue a bootloader (even if it originally came from somewhere else) that...
Tuesday, 2 June 2009 - 14:41
Can't compile samples from BitCloud (ZigBee) with WinAVR Quote:It is possible to find some examples for ZigBit to create simple data transmission without using ZigBit/BitCloud stack?
I do not think so. This way of using it is not...
Tuesday, 2 June 2009 - 14:40
Can't compile samples from BitCloud (ZigBee) with WinAVR On MeshBean boards USART_CHANNEL_1 is connected to UART-to-USB converter and USART_CHANNEL_0 is on the P2 connector. Use any you like.
PS: srec from hex can be obtained by avr-...
Can't compile samples from BitCloud (ZigBee) with WinAVR code-by wrote:
Maybe some one have regular C-program for using ZigBee with mega 1281?
BitCloud is a regular C-program. ZigBee Pro standard is 600+ pages document. So it is not...
Wednesday, 20 May 2009 - 12:10
Can't compile samples from BitCloud (ZigBee) with WinAVR PS: Low power reads temperature by default. WsnDemo reads light, temperature and battery. Combine them :)
Or you can start with WsnDemo. Just remove reading of anything except...
Wednesday, 20 May 2009 - 11:20
Can't compile samples from BitCloud (ZigBee) with WinAVR code-by wrote:I try to add ADC from "battery.c" to "lowpower" sample, but compiler show error "D:\ZigBit\Sample Applications 2\Lowpower/src/coordinator.c:286: undefined reference...
Wednesday, 20 May 2009 - 11:10
Can't compile samples from BitCloud (ZigBee) with WinAVR code-by wrote:ok.
1. some one have correspondence between Atmega 1281 and meshbean ZDM-A1281 pinout?
You may ask tech support. But since HAL is open source now You can just look...
code-by wrote:Coud somebody explain why coordinator immediately found network after pressing SW1 button in Lowpower sample of Bitcloud SDK 1.5 even there no any powered meshbean...
code-by wrote: Now I search examples for zigbit to work w/o zigbit/bitcloud stack, because it consume much memory and it's difficult to make more flexible programs :) Have a look...
code-by wrote: When I use WSN Monitor, boards powered by battery shows values about 200 units, but when I insert battery function into lowpower sample, it shows -45, -50, -55, -60...
clawson wrote:Ah there's nothing like consistency! So even though everything else Atmel is Intel Hex they issue a bootloader (even if it originally came from somewhere else) that...
Quote:It is possible to find some examples for ZigBit to create simple data transmission without using ZigBit/BitCloud stack? I do not think so. This way of using it is not...
On MeshBean boards USART_CHANNEL_1 is connected to UART-to-USB converter and USART_CHANNEL_0 is on the P2 connector. Use any you like. PS: srec from hex can be obtained by avr-...
I hardly doubt you can damage anything. Just remember common AVR advices. Like do not disable JTAG in fuses, etc.
Try something like this (this code reads ADC dedicated to battery only) In APL_TaskHandler(): BSP_OpenBatterySensor(); BSP_ReadBatteryData(batteryDataReady); And...
code-by wrote: Maybe some one have regular C-program for using ZigBee with mega 1281? BitCloud is a regular C-program. ZigBee Pro standard is 600+ pages document. So it is not...
PS: Low power reads temperature by default. WsnDemo reads light, temperature and battery. Combine them :) Or you can start with WsnDemo. Just remove reading of anything except...
code-by wrote:I try to add ADC from "battery.c" to "lowpower" sample, but compiler show error "D:\ZigBit\Sample Applications 2\Lowpower/src/coordinator.c:286: undefined reference...
code-by wrote:ok. 1. some one have correspondence between Atmega 1281 and meshbean ZDM-A1281 pinout? You may ask tech support. But since HAL is open source now You can just look...
Pages