Post Created date
Non-Standard Zigbee data rates
Some actually might. In Atmel case, high data rate is achieved in a most obvious way - by removing spectrum spreading and using the entire channel bandwidth for the data. You can...
Tuesday, 15 September 2015 - 16:18
LW Mesh broadcast messages
No, broadcasts are just a part of this system. There is no fast way to create routing tables from any device to any device, it has to be done on one by one basis. But sub-routes...
Tuesday, 15 September 2015 - 16:09
Lightweight Mesh network size
claudio01 wrote:1) The problem is our actual Gateways contains the mention module, so we will like to port Lightweight Mesh to a different radio, do you know if are examples...
Tuesday, 15 September 2015 - 07:05
BitCloud compatibility for ATSAMR21G17
There is no way to fit BitCloud into 128KB device and have a useful application running on top of it.
Tuesday, 15 September 2015 - 06:58
LW Mesh broadcast messages
Yes, it does. Broadcast messages is one if the ways routing tables are populated ins a first place.
Tuesday, 15 September 2015 - 06:56
WSNMonitor protocol messages
Download LwMesh version of the WSNDemo application. It is quite obvious how data structure is serialized and what fields it has.
Tuesday, 15 September 2015 - 06:54
Atmel Lightweight Mesh stack
timali wrote:I may have found a serious security issue with v1.2.1 when using XTEA. XTEA encryption should really be removed altogether. It was only added because RF230 has no AES...
Tuesday, 15 September 2015 - 06:51
Porting LwMEsh to Atmega1284p
MarcoScordo wrote:I don't understand where the NWK_TX_STATE_CONFIRM is settled without have NWK_NO_ACK_STATUS If I understand your question correctly, then you need to look...
Tuesday, 15 September 2015 - 06:48
Atmega328p Xplained mini --- where are R300 and R301?
And I guess by populating both of them, they saved a price of two jumpers. Probably something like $0.01 in quantity :)
Tuesday, 1 September 2015 - 00:35
Atmega328p Xplained mini --- where are R300 and R301? Tuesday, 1 September 2015 - 00:17
Atmega328p Xplained mini --- where are R300 and R301?
Full design documents are available here http://www.atmel.com/tools/mega3...   The schematic PDF also includes board layout at the end.
Tuesday, 1 September 2015 - 00:15
mEDBG USB/Serial Baud rates?
Yeah, I've noticed the same thing.   In my MCU starter projects I use 38400 for mEDBG.  
Saturday, 29 August 2015 - 16:55

Pages