Type in the full discussion title or a part of it.
Discussion Title Created date
Bootloader not working
I have my own board. I use ATmega8. A bootloader is needed, so I found this one, burned it on my chip. I had to change the LED pin in the assembly code though, but that's the only...
Friday, 5 March 2010 - 17:40
Yet another optimization problem
typedef struct { volatile uint8_t* port; uint8_t pin; } pin; typedef struct { uint8_t movement; uint8_t afterlife; bool smooth; uint16_t slowFactor; uint16_t strength;...
Saturday, 16 January 2010 - 08:38
I want to upgrade my binutils to 2.19. But there are no packages, so I wanted to compile it. I get the exact same error like here: [PATCH][AVR] fix unsafe uses of sprintf But that...
Sunday, 26 April 2009 - 06:53
Looking for I2C or SPI transceiver!!!
I'll be brief. I want to make a single-rocket launch controller, with a 50m cablec dual line. I'll use a differential line. I'll put a i2c or an SPI I/O extender on the far-away...
Saturday, 18 April 2009 - 17:26
Aaargh! Error reading using AVRDUDE and STK500v2
I use: /usr/bin/avrdude -C /etc/avrdude.conf -p m8535 -P /dev/ttyUSB0 -c stk500v2 -B 17.361 -U flash:r:/home/main/test.hex:a to read the flash from ATMega8535 AVRDUDE reads it...
Sunday, 12 April 2009 - 08:35
USBprog - anyone used it, is it worth?
I found this programmer on the internet, and I have all of the components except that USB controller, but it is a bit expensive. So, has anyone used it, is it worth making, any...
Sunday, 12 April 2009 - 05:39