Type in the full discussion title or a part of it.
Discussion Title Created date
Advice for ATmega328 based board: Arduino compatible?
I'm thinking of developing a simple (DIP package) ATmega328 based board with an 18.432 MHZ crystal, for increased speed and better matching of numerous baud rates without errors....
Friday, 20 December 2013 - 00:50
[TUT][HARD][74HC595]
I have seen numerous tutorials on how to connect one or more 74HC595 shift register chips to an Arduino or AVR chip to get more digital outputs. Most of these are well done and...
Friday, 28 December 2012 - 16:52
[CODE][ASM][ATTINY] Bit-bang UART, number conversion, and debugging routines
I come from an assembly language 8051 family background, so when I started working with some ATTINY chips I wrote the following code which I had already written many years ago for...
Thursday, 13 December 2012 - 13:47
OT? Using AVRISP with 89S or 89LP series
Apologies for the somewhat off topic question. Has anyone used Studio 4 (or any other software) with the AVRISP to program 8051 core AT89Sxxxx or AT89LPxxxx chips. It would seem...
Wednesday, 9 March 2011 - 01:08
Question about AVR042: AVR Hardware Design Considerations
Have any of you had any experience with using (or needing) an inductor in the power supply circuit of your chip as suggested by AVR042 Figure 2.2? If so, what values for L and C?...
Friday, 15 May 2009 - 14:08
Why would someone use a custom Make file?
How long has AVR Studio had the ability to create its own Make file on the fly while building a project, rather than having the programmer create their own (required) Make file?...
Saturday, 18 April 2009 - 00:24
Atmel HID keyboard code/Olimex AVR-USB-162
I have been playing with the Atmel HID keyboard code, using the Olimex AVR-USB-162. The document "AVR271: USB Keyboard Demonstration" says: "The demonstration does not manage the...
Friday, 17 April 2009 - 02:27
changes since Which C Compiler Should I Use
In the articles section there is an article called: "Which C compler should I use" by Adam Johnson dated March 2002. What is everyones's opinion of what has changed since he wrote...
Tuesday, 14 April 2009 - 16:44
questions about USB descriptors in example Atmel code
The following is in an HID example, in the file usbdescriptors.h // USB Endpoint 1 descriptor FS #define ENDPOINT_NB_1 (EP_HID_IN | USB_ENDPOINT_IN) #define...
Monday, 13 April 2009 - 14:18
mass storage memory types/chips
I currently working with a AT90USB162. I have been looking through some of the example source for mass storage. I see files related to dataflash, SCSI, and SPI. But let's say I...
Sunday, 5 April 2009 - 20:46
file added to project not compiling
I have successfully built an example USB project that uses a generic make file. When I added another source code file to the project it is not being compiled. I can prove that it...
Thursday, 12 March 2009 - 15:28
files listed after project is opened
I have opened a number of example projects in AVR Studio. I notice that some have source, resource, dependency, and "other" files listed, and that others only have source files...
Thursday, 12 March 2009 - 01:23

Pages