Post Created date
PortB0 stuck at 2.5V
That did it,sbennet. Wow, I would never have stumbled upon it. I guess reading the datasheet helps. Thanks.
Thursday, 10 December 2009 - 10:23
Is there any way to turn on matching brackets?
Thanks, guys. I will try Eclipse. I wonder if you can do that in MSVC++.
Thursday, 10 December 2009 - 02:32
AVR with FPGA
Can I apply logic level signals through an AVR and read the outputs from the o/p pins with an ADC? I could probably MUX the FPGA output pins and read them with an ADC. If I know...
Monday, 7 December 2009 - 00:56
AVR with FPGA
Can I not use the AVR JTAG and/or AVR SPI pins to check if it is working? I can't write to the FPGA as it is protected. I just want to read back or check if the i/p and o/p are...
Sunday, 6 December 2009 - 18:04
Trouble with a MOSFET
Here is a recent paper I found on techonline: [url] http://www.techonline.com/learni... [/url] I haven't read it yet but may be worth a look.
Wednesday, 2 December 2009 - 10:43
Trouble with a MOSFET
If you absolutely have to use a transistor, go for an NPN (2N2222) instead of a MOSFET.
Tuesday, 1 December 2009 - 14:03
M328P and MUX (again!)
Ok it worked. I had the wrong physical portB connection on my breadboard. Thanks.
Sunday, 29 November 2009 - 19:49
M328P and MUX (again!)
Thanks, kk6gm. Sorry for the incomplete info. I need Portb0 always high to select another mux. I also want to select PORTB3 when count = 17 which is why I have 0x09. 0x11 selects...
Sunday, 29 November 2009 - 00:22
What is the fastest method for port output? PORTX?
Sorry Johan, I misspelled your name..Maybe you can add that as another FAQ..:)
Tuesday, 24 November 2009 - 02:01
What is the fastest method for port output? PORTX?
Quote: The quality of the answers you get is correlated with the quality of the question you ask. Johann, you should add this as a FAQ in your signature something like what Cliff...
Monday, 23 November 2009 - 14:21
uart only sends first two bytes
As an advice from a newbie who has gone through this drill, I suggest reading the tutorials before you attempt anything new. It will save you hours,days even months of time.
Monday, 23 November 2009 - 14:16
What is the most basic circuit to get a crystal to oscillate
Or you can also use a 555 timer.
Wednesday, 18 November 2009 - 14:26

Pages