Type in the full discussion title or a part of it.
Discussion Title Created date
hyperterminal and RTC
Hi guys, I am trying a real time clock on a STK500 kit. (I know there are multiple projects on this but I just want to learn it from scratch). I am using interrupt based counting...
Tuesday, 17 March 2009 - 08:37
auto reload of timer1 in Mega16
Is there an auto-reload command for timer 1 in interrupt mode? here is my timer function: void timer_init() { TIMSK |= (1 << OCIE1A); //enable channel...
Monday, 16 March 2009 - 20:38
JTAG ICE MKII substitute?
Does anybody know an alternative JTAG programmer other than the JTAG ICE MKII? I looked at the price of one of these and it is > $100. I am using the STK500 board and would like...
Thursday, 12 March 2009 - 20:19
ISP programming problem for STK500
Hi Guys, I have an STK500 board. Till now I was using the JTAGIE MKII option connected to the USB port of my PC to program my Atmega16. Now I have switched over to serial. I have...
Tuesday, 10 March 2009 - 16:52
which port has the temperature sensor on the STK501 board?
This may be a stupid question, but I have a STK501 board and am trying to find out which port has the temperature sensor on it. I looked at the STK501 manual but could not see...
Monday, 9 March 2009 - 03:11
Serial interface loses sync
Don't know if this is the right forum, but I have got a general question. What could go wrong if I am seeing an intermittent problem on a serial RS232 interface? The symptom is...
Monday, 2 March 2009 - 00:34
where to buy STK500
hi guys, does anyone know a good website to buy the STK500 kit? The one that the Atmel website shows has the kit for about $96.
Friday, 27 February 2009 - 01:01
PLL question
Hi, I have a 1GHz PLL and the voltage at the output of the phase detector + charge pump block is too high. Any ideas what may be wrong? thanks
Thursday, 26 February 2009 - 16:49
power supply decoupling
Hi, I saw a power supply decoupling network as shown in the attached figure. Why is this a pi network? Why not just use a tantalum cap and a series inductor? Appreciate any help.
Thursday, 26 February 2009 - 00:29
USART
hi how can I use only the transmit function of the USART on Atmega16? i have tried Dean's tutorial on USART and it works fine. However I want to try and write data to the AVR...
Monday, 23 February 2009 - 14:58
how to set desired frequency on STK500 for USART
hi i am using STK500 with Atmega16 and would like to set the Atmega at 3.6864MHz (since i need a multiple of 1.8432M) so that i can use the USART. i looked at the STK500 manual...
Thursday, 19 February 2009 - 21:38
embedded systems training
hi all, this may not be the right place to ask but does anybody know about a good online training course for embedded systems programming and design? i would like to get trained/...
Tuesday, 17 February 2009 - 14:17

Pages