Type in the full discussion title or a part of it.
Discussion Title Created date
Tiny24 timer0 in normal mode problem
I've used the timer in other modes but wanted to just get a basic timer interrupt going using the timer in normal mode and use the overflow interrupt to do it but can't see the...
Sunday, 8 March 2009 - 21:58
TQFP100 for stk600
Don't know if this is of any value. http://avnetexpress.avnet.com/st...
Wednesday, 25 February 2009 - 01:02
Tiny261 pin definitions
I'm getting ready to play (no pay) with the 261(can be set to run at 16MHz using the PLL without an external clock-more speed Scotty) and was looking at the pins and it seems they...
Wednesday, 18 February 2009 - 03:14
DB101 - AVR483
Ok, I decided to try a little 'C'ode work with the DB101 and downloaded the IAR Kickstart and AVR483 from Atmel. AVR 483 mentions a code package that's available(pg11 of AVR483)...
Monday, 31 December 2007 - 00:22
Holding a Dragon
Since the Dragon has no holes for mounting,I took some rubber grommets and a few screws (could be machine for thru holes or wood for going into wood)and used a washer between the...
Saturday, 19 May 2007 - 03:50
Dragon does AT90USBKey thru JTAG
The latest update of Studio now allows the Dragon to work as a programming tool (not debug)through the JTAG interface on the Key's JTAG port . The (hack)cable in the picture is...
Sunday, 4 March 2007 - 04:43
AVRISP MKII -digikey
Just checked digikey and they have about 240 MKII's in stock. Have fun! Pete
Thursday, 4 May 2006 - 21:52
AVRISP MKII at Digikey
Spotted some mkII 's at digikey if anyone is interseted . Pete
Wednesday, 12 April 2006 - 00:47
MKII can not do
Got a avrispMKII this week and installed everything fine . Hooked it up and made sure the correct avr was set and read the signature . Fine, it worked and then read the fuses -...
Saturday, 18 March 2006 - 23:27
mega48 Timer0 and pwm
Hi Made time over the holidays to do some tinkering on a mega48. Set up a adc with a simple 10Kpot and a small program( as found here ) and got it putting out values to a...
Friday, 30 December 2005 - 01:02