| Discussion Title | Created date |
|---|---|
|
Tiny24 timer0 in normal mode problem I've used the timer in other modes but wanted to just get a basic timer interrupt going using the timer in normal mode and use the overflow interrupt to do it but can't see the... |
Sunday, 8 March 2009 - 21:58 |
|
TQFP100 for stk600 Don't know if this is of any value. http://avnetexpress.avnet.com/st... |
Wednesday, 25 February 2009 - 01:02 |
|
Tiny261 pin definitions I'm getting ready to play (no pay) with the 261(can be set to run at 16MHz using the PLL without an external clock-more speed Scotty) and was looking at the pins and it seems they... |
Wednesday, 18 February 2009 - 03:14 |
|
DB101 - AVR483 Ok, I decided to try a little 'C'ode work with the DB101 and downloaded the IAR Kickstart and AVR483 from Atmel. AVR 483 mentions a code package that's available(pg11 of AVR483)... |
Monday, 31 December 2007 - 00:22 |
|
Holding a Dragon Since the Dragon has no holes for mounting,I took some rubber grommets and a few screws (could be machine for thru holes or wood for going into wood)and used a washer between the... |
Saturday, 19 May 2007 - 03:50 |
|
Dragon does AT90USBKey thru JTAG The latest update of Studio now allows the Dragon to work as a programming tool (not debug)through the JTAG interface on the Key's JTAG port . The (hack)cable in the picture is... |
Sunday, 4 March 2007 - 04:43 |
|
AVRISP MKII -digikey Just checked digikey and they have about 240 MKII's in stock. Have fun! Pete |
Thursday, 4 May 2006 - 21:52 |
|
AVRISP MKII at Digikey Spotted some mkII 's at digikey if anyone is interseted . Pete |
Wednesday, 12 April 2006 - 00:47 |
|
MKII can not do Got a avrispMKII this week and installed everything fine . Hooked it up and made sure the correct avr was set and read the signature . Fine, it worked and then read the fuses -... |
Saturday, 18 March 2006 - 23:27 |
|
mega48 Timer0 and pwm Hi Made time over the holidays to do some tinkering on a mega48. Set up a adc with a simple 10Kpot and a small program( as found here ) and got it putting out values to a... |
Friday, 30 December 2005 - 01:02 |