Post Created date
unique id on atmega328pb
Hi,   I had missed that, but thank you for pointing it out. I don't think it will be a problem as I read the unique id into ram before I enable interrupts.  However if I...
Monday, 21 December 2015 - 04:32
unique id on atmega328pb
Hi Everyone,   Thanks for your help.  I eventually went with the boot_signature_byte_get in boot.h.  It works perfectly for what I needed.   Thanks,  ...
Saturday, 19 December 2015 - 12:59
using flip with serial bootloader on uc3b0256
sambrown wrote:you must cut out the correct regions with srecord, do you have a bash available? if so I can give you a nice srecord scipt but you also may derive something from...
Wednesday, 27 February 2013 - 15:29
using flip with serial bootloader on uc3b0256
Edit: So I used a prog called srecord to try and combine my 2 hex files, however it complains that they both have conflicting sections at 0x80000000. I believe this may be the...
Tuesday, 26 February 2013 - 16:25
uc3b0256 uart bootloader
Thanks for your advice. I ended up making a bootloader by using the uart bootloader code for the UC3L, and then modifying it for the UC3B. However I now have further problems...
Tuesday, 26 February 2013 - 15:46
IR Phototransistor distance sensor/proximity
Hi everyone. Thanks for your help. I have decided to experiment with qtouch rather, as this was supposed to detect fingers. The capactive touch has the added advantage that the...
Friday, 19 October 2012 - 20:37
IR Phototransistor distance sensor/proximity
ka7ehk wrote:How close is "close" and how far away is "far away"? Is close mm, cm, m, km? Jim As I said above, I am looking at about a 4cm distance max
Tuesday, 9 October 2012 - 16:51
IR Phototransistor distance sensor/proximity
valusoft wrote:Steed, Your description fits this ... http://www.maxbotix.com/Ultrason... Yes, I was also thinking of something like that, but the price is prohibitive. I need to...
Tuesday, 9 October 2012 - 16:47
IR Phototransistor distance sensor/proximity
valusoft wrote:Steed, Your description fits this ... http://www.maxbotix.com/Ultrason... Yes, I was also thinking of something like that, but the price is prohibitive. I need to...
Tuesday, 9 October 2012 - 16:47
10 way idc female for jtag
clawson wrote:Someone should have made a sticky thread at the top of this forum. Oh wait... I read that post, sadly it seems to deal with the 6pin isp connector more than the jtag...
Tuesday, 24 July 2012 - 08:44
10 way idc female for jtag
david.prentice wrote:will these do David. These are perfect, thank you very much :)
Tuesday, 24 July 2012 - 08:43
problems with usarts and interrupt receive on uc3b0256
Hiya, Sorry, I did not see your post immediately. I managed to figure the problem out as a overrun error because I had too much code in my rx interrupt trying to interpret what I...
Friday, 8 April 2011 - 14:13

Pages