Type in the full discussion title or a part of it.
Discussion Title Created date
Atmega32u4 Lufa mass storage bootloader makefile parameters
Hi,   Need to compile Lufa mass storage bootloader for arduino micro atmega32u4.   Any hints on what the lufa makefile params would be?     Placed these in the...
Monday, 26 September 2016 - 12:26
ATTiny with both I2C Slave and I2C Master separate buses
Hi, What I need is an ATTiny (45/85) to have two concurrent I2C buses, one Slave and a separate one Master. I've seen in various places, code that can have the ATTiny as either...
Sunday, 16 January 2011 - 13:41
Can we use the sound/soc/atmel files in AP7000?
Hi, There is a ASoC implementation in sound/soc/atmel. It has SSC with DAI for ASoC. The above ASoC SSC DAI framework does compile ok for AP7000 but the ASoC codec example...
Saturday, 15 August 2009 - 15:13
Pin multiplexing on NGW100 expansion
I'm trying to disable the SPI0 on the J5 connector and change it with the SSC1. I have done these 1.Removed the spi initialization line from the u-boot, recompiled and flashed the...
Sunday, 9 August 2009 - 18:52
U-Boot compile for AP7000 [RESOLVED]
Hi, Does anyone have a pointer or link for U-Boot recompilation. I have seen the http://www.atmel.no/buildroot/bu... and there is a tarball with the source. Or is it ben built by...
Saturday, 8 August 2009 - 18:11
Buildroot and Kernel sources [SOLVED]
Just a question on Atmel's Buildroot. Is there any specific reason for using Atmel's buildroot specific download or can we use the official buildroot? Are the sources contained in...
Tuesday, 19 May 2009 - 19:09
AP7000 SSC
Hi, My flashed image for the NGW100 has been built with buildroot 2.3. When I tried to enable the SSC driver I got this message ~ # modprobe atmel-ssc modprobe: Failed to load...
Saturday, 9 May 2009 - 04:53
NGW100 onboard ATTiny [CLOSED]
Does anyone know how can to diable entirely the on board ATTiny? (apart of course from removing it from the board :) ). Or at least not to report its presence on i2c address 0x0b...
Tuesday, 5 May 2009 - 20:59
I2C on AP7000 Buildroot 2.3 [CLOSED]
Hi, I'm new to linux I2C and I need some help on controlling a chip. The interface board that we constructed and connects to NGW100 has a PCA9555 I2C chip that I need to control....
Monday, 4 May 2009 - 13:35
NGW100 USBA in isochronous
Hi, For my project I try to configure the NGW100 as a usb device having isochronous endpoints. I know that this is the standalone place but there was no solution given in the...
Wednesday, 22 April 2009 - 13:01
NGW100 usbtest isochronous/bulk [CLOSED]
Hi, For my project I try to configure the NGW100 as a usb device having isochronous endpoints. I've managed to perform some tests with the usbtest/testusb suite. It seems that the...
Monday, 20 April 2009 - 23:45
AT32AP7000 SSC
The need is to connect a stereo 24bit I2S codec on AP7000, the TLV320AIC23B. There is some grey area regarding the SSC from the documentation so far. There are some posts saying...
Saturday, 21 March 2009 - 19:51

Pages