Post Created date
USBasp Programmer
Quote:Can u provide me with the circuit schematic and the HEX file that u use please.? The circuit is as shown on Tomas Fischl site as is the firm ware. I just copied it blindly...
Wednesday, 12 February 2014 - 14:15
USBasp Programmer
I make my own as well. Have done for a long time and never had trouble. First check that your PC recognises it. On Linux lsusb Bus 002 Device 003: ID 16c0:05dc Connect and...
Wednesday, 12 February 2014 - 09:31
Mega/Tiny with PLL-multiplied clock output?
The Tiny45 has 64MHz and clock out but I dont know if it meets all your conditions. Snag I have found with it is you dont get many pins to connect things to. John
Friday, 3 May 2013 - 12:28
which new type of the Microcontrollers to learn?
From the link you provided it looks like you are in Italy. Follow the link to the data sheet given on that page. Read section 9.2 Auxiliary Clock Generation. It is not stated...
Sunday, 28 April 2013 - 15:33
which new type of the Microcontrollers to learn?
Quote:yet the DSpics look to be the top choice but they are 16bitters, also the clock frequency is not very high. Just short of 1GHz in the case of dsPIC**GS** types. These use...
Sunday, 28 April 2013 - 09:44
avr-gcc: New Features?
Quote:What are "Jörg's patches"? They hang out around here. Bingos scripts, the sticky at the top of...
Thursday, 7 February 2013 - 14:51
avr-gcc: New Features?
How is it with Joergs patches now ? Are they needed now ? Could they be built in so no patching ? What did they do anyway ? John
Wednesday, 6 February 2013 - 08:47
usbasp not working
Looks like you are on Linux. What version? In some root has to give permission to user for usb. Are you root or user? In other versions you need udev rules to create a device node...
Wednesday, 3 October 2012 - 13:31
What are _you_ using avr's for?
Quote:Are referring to the pll that multiplies the system clock by eight to be used as i/o clock? Yes that is one way to put it. One of the problems in applying microcontrollers...
Friday, 3 August 2012 - 08:35
What are _you_ using avr's for?
I have wondered what people use them for and how they got started. I work with power convertion (power electronics). I have worked in the subject for a long time and now applying...
Friday, 3 August 2012 - 08:07
winavr new programmer
I am a USBASP user and have been for some time. There are plenty of posts here on the subject. You must tell us what the message is . What do the two LEDs do? What link choices...
Sunday, 22 April 2012 - 09:14
I2C slave with AVR311 Not working as it should
Best to start with a simple hardware only slave on your bus. Like the bus expander and a few push buttons & LEDs. Make sure first your master communicates with that. My own...
Wednesday, 7 March 2012 - 19:49