Post Created date
Array part of brain has been erased! - Help!
Nice!! T
Wednesday, 19 September 2007 - 14:48
avr c tutorial
Why not just click on the smileymicros ad on this site - seems he has everything you are looking for T
Wednesday, 13 June 2007 - 15:39
Sending a character from HyperTerminal, using UART
I hope I hve not overlooked it, but what is the clock (crystal) frequency you are running the Mega32 at? T
Tuesday, 22 May 2007 - 18:10
uart string transmit
hmmm - sorry all my stuff is winavr!
Sunday, 13 May 2007 - 02:06
uart string transmit
hmmmm last suggestion are you including at the start of your program I recall char should be a single byte (but may be 16 bits) while it may sound strange, try a different...
Saturday, 12 May 2007 - 00:14
uart string transmit
Dumb question, but what are your parity and word length + stop bit settings (8 N 1 ) Also, what program are you using on the other end of the AVR? (because Hyperterminal has...
Friday, 11 May 2007 - 21:29
simple calculations in Atmega16 not working
Randy: Why? scaled_andle is defined as a float. The value to the timer is then (properly) cast as a byte ... but... scaled_angle is always larger than 510 and is too large to fit...
Friday, 11 May 2007 - 21:25
Broken one-wire code... always getting 1's back!
you should use the _delay_us(n) routines that are part of the GCC. They work real well. I'll try and load my code for the Onewire with the Dallas chip to help you along
Friday, 11 May 2007 - 21:17
uart string transmit
As a simple test try USART_Print("Hello world"); see if that works The you may try define the size of the array so msg[10]="Hello";
Friday, 11 May 2007 - 18:22
uart string transmit
This is my version (ATMega32) and it works extern void USART_Transmit_Char(uint8_t data) { while (!(UCSRA & (1<<UDRE))); UDR=data; }//USART_Transmit_Char extern...
Friday, 11 May 2007 - 15:09
Broken one-wire code... always getting 1's back!
Is it really necessary to use the timer for this. I can share my code with you for OW devices, but it just waits using a delay routine rather than banging around with the timer. T
Friday, 11 May 2007 - 14:58
Digikey will not ship EVK1100 to Canada!
Thanks - but rather than start an international embedded systems smuggling ring ;) I'll call Digikey and see what gives. Usually export restrictions are only on items...
Friday, 11 May 2007 - 14:45

Pages