Post Created date
ATtiny214 debugger Memory SRAM doesn't update?
Hi @je_ruud   That's great. Installed the update, and a quick check shows the SRAM display for the ATtiny214 is now showing more than 0x00 :-)  Thanks for the quick fix...
Wednesday, 7 April 2021 - 19:57
Anyone Tried the Example I2C (TWI) Code in Studio?
In #33, nobbyv wrote: I am suitably embarrassed. While testing at 400kHz, I commented out  TWCR0 = (1 << TWEN) /* TWI0: enabled */You mean in your #19? //TWCR0...
Thursday, 1 April 2021 - 22:16
Anyone Tried the Example I2C (TWI) Code in Studio?
This may not make the difference but ... /* SCL bitrate = F_CPU / (16 + 2 * TWBR0 * TWPS value) */ /* Configured bit rate is 400.000kHz, based on CPU frequency 12.000MHz */...
Thursday, 1 April 2021 - 10:25
Set Next Statement workaround: debugging on the simulator in Studio 7.0.2542
Yes, dead-right Cliff: all-GNU toolchain.
Wednesday, 31 March 2021 - 10:11
Set Next Statement workaround: debugging on the simulator in Studio 7.0.2542
Sorry, I haven't checked earlier versions and - no offence - don't plan to. I've managed to avoid Studio for years; I only installed Version 7 when recently I had no...
Wednesday, 31 March 2021 - 09:56
ATtiny214 debugger Memory SRAM doesn't update?
I should describe that second issue - with the address offset - less, er, randomly ;-)   It's consistent in that the errors I've seen have always caused an offset of...
Friday, 26 March 2021 - 07:50
ATtiny214 debugger Memory SRAM doesn't update?
Thanks! That makes sense - good to think it mightn't be something dumb I've done ;-)   Re. the ATtiny24A and ATtiny2313: I only happened to try those because I had...
Friday, 26 March 2021 - 07:07
Run to cursor in Microchip Studio 7?
Thanks for the interest, folks. Wasn't on my right-click (new install of the latest Microchip Studio 7.0 about four days ago, with all available updates). @meolsen: I'm using...
Friday, 26 March 2021 - 05:29
Run to cursor in Microchip Studio 7?
Found it! It's still available (as Debug.RunToCursor), but no longer on the Debug default toolbar so must be added.
Thursday, 25 March 2021 - 22:28
TWI slave state-machine vs SCTRLB for ATtiny 1-Series
Hey that's great, Curt - thanks. Yes, I too found the older AVR datasheets useful for clarification, even though their TWI architectures are a little different from the...
Friday, 5 February 2021 - 05:45
TWI slave state-machine vs SCTRLB for ATtiny 1-Series
Hi Jim. Me either! Which may say more about my sheltered upbringing than about state machine diagramming, but ...   Yes, I like it too. I'd like it more in this case if I had...
Friday, 5 February 2021 - 02:50
TWI slave state-machine vs SCTRLB for ATtiny 1-Series
Hi @curt, thanks for your reply. The slave effectively goes back to waiting for a start (or repeated start, same thing) when it nacks an address. That's true. My point is that...
Friday, 5 February 2021 - 02:47

Pages