| Discussion Title | Created date |
|---|---|
|
Optocouplers: Dear all, I am looking at a circuit that contains both a CNY17-3 optocoupler, and a 6N136 opto-coupled logic gate. The specific circuit is from the OpenDCC project (model railways... |
Saturday, 26 January 2013 - 03:51 |
|
Low-cost (Asia?) PCB Assembly Houses Dear all, I am looking to assemble 50 or so simple boards (10 line items, about 30 components, 0603 or larger, all SMT except a connector. No DFN or BGA parts), maybe 100 if that'... |
Sunday, 30 December 2012 - 06:20 |
|
SMT Equivalent of 1N4148 Diode? Dear all, Given the success in the last thread on transistors, I thought I would ask about SMT variants of the venerable 1N4148 diode. I got as far as the MMSD4148, but I suspect... |
Saturday, 29 December 2012 - 23:57 |
|
Screw terminal blocks: SMT or through-hole reflow? Dear all, I am looking to use some screw terminal blocks for a design. The board consists entirely of SMT parts with (maybe) the exception of the screw terminal block for... |
Saturday, 29 December 2012 - 07:38 |
|
SMT Equivalent of 2N3904 Transistor? Dear all, I'm looking for a SMT NPN transistor about the equivalent of the 2N3904, say in a SOT-23 package or similar? Normally I'm a software guy, but I am trying to create a... |
Saturday, 29 December 2012 - 03:09 |
|
Capacitor selection for Honeywell HMC5883L Hello all, I am currently looking at a HMC5883L design and the datasheet has a special note for two capacitors: Quote: The two external capacitors should be ceramic type... |
Sunday, 29 July 2012 - 23:28 |
|
Flash tables - order of variables of gcc 4.3.4 vs 4.6.2 Dear all, In my code, I have a table of variables as follows: #include "version.h" #include #define VERSION_TABLE __attribute__ ((section (".version_table... |
Thursday, 12 July 2012 - 00:54 |
|
Interfacing a differential Sensor to a Differential ADC Hello All, Being a hopeless amateur at analogue electronics, I hope someone can give me a few hints on a problem that I have :) I have a differential analogue sensor with the... |
Monday, 6 February 2012 - 08:01 |
|
Using TOSC (RTC) with 32K clock (not XTAL) Hello all, We are designing a board, and a 32K clock source is already available on the board (it is needed elsewhere). I would like to connect this clock source to the RTC,... |
Friday, 7 October 2011 - 01:44 |
|
1-wire (or I2C) to USB bridge Hello all, I am trying to find a 1-wire to USB bridge, essentially so that I can talk to a 1-wire bus from USB from a host PC. Does anyone know of a device that does it? There is... |
Monday, 12 September 2011 - 05:08 |
|
Single-supply DAC controlled bidirectional current source? Hello all, I have an analogue problem which I hope someone can push a hardware-challenged software person (me) in the right direction :) What I need to do is precisely set control... |
Wednesday, 11 May 2011 - 13:02 |
|
Salt water (ocean) immersion detection Dear all, I'm toying with some ideas for a holiday project. What I want to do is to reliably detect when a device is submerged in the ocean, or perhaps more importantly, when the... |
Monday, 27 December 2010 - 00:43 |